When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
What would cause my rev counter to stop working? Last couple of days everynow and then it would read only half the revs then be ok after a few minutes. Any ideas?
Thanks Billy
Not within the ECU as that has nothing to do with the tacho, the common problem is the PCB on the actual instrument itself, fortunatly it's easily repaired, if it is this.
my rev clock wasnt working and i cleaned and sanded all my earths from the battery and its working again, might be worth a go?
I do hope it wasn't glass paper you used to clean the earths up ?, the glass particles can melt on the surfaces if there is any arcing and are a ace insulator, though this was normally a problem on older cars where people cleaned the points with glass paper, and the car conked out a few miles later!!
tabetha