Moonstone Mo

iTrader: (3)

rite, i have been running the standard plastic dumpy on the tb side but it had split so i swaped it for a shitty what i think is a piston type one but now it just hisses really really loud..if i was to put it on the airfilter side would it be quieter and would i get my chatter back?

cheers.

BigErn

would there be any point putting it on the air filter side? The air will have already have came back through the turbo blades before it gets released by the valve wont it

BigErn

What turbo and what boost pressure do you run?

Psycho Warren

iTrader: (5)

isnt chatter compressor stall??? if so, isnt a dumpvalve meant to prevent compressor stall and therefore no chatter sound

Moonstone Mo

iTrader: (3)

t3 hybrid,360 bearing,cut backs running 23psi

tabetha

If you want chatter just run without a DV, putting it on hot side is not likely to make it any different noise wise.
tabetha

Moonstone Mo

iTrader: (3)

thanks people.

how about runninga re circulating one again just not the standard plastic one.?

Moonstone Mo

iTrader: (3)

whats the bestway to blank off the vac pipe.

focus 4x4

Do away with the dump valve completely!

cozmeister

iTrader: (1)

Remove the T-Piece and have your boost gauge connected directly to the manifold.