YB 205 bottom end rebuild
#1
YB 205 bottom end rebuild
Hi, i just got the call for the cost of the above plus T3 with a 360 bearing. comes to just over 2 grand .
The crank needs a regrind , the pistons being replaced with good quality 2nd hand items , is this sounding about right? its a very reputable company so i dont mind paying it as i know it will be spot on , was just wondering what other people have been quoted with similar spec. i know every engine rebuild is gonna be individually different plus turbo , just be nice to see what others have paid out of interest. Its a standard setup as close to standard compression etc etc. ???
The crank needs a regrind , the pistons being replaced with good quality 2nd hand items , is this sounding about right? its a very reputable company so i dont mind paying it as i know it will be spot on , was just wondering what other people have been quoted with similar spec. i know every engine rebuild is gonna be individually different plus turbo , just be nice to see what others have paid out of interest. Its a standard setup as close to standard compression etc etc. ???
Last edited by opposite lock; 13-05-2009 at 01:09 PM.
#6
thanks guys for the reponse, its actually gonna be just over 2 grand so now i,m gonna have a rethink for the go ahead, i know its my money but i h8 the idea of saying to them i,m not up 4 it.
have just spoke to a friend ive not seen for a long time didnt even know if he still had his saff , he,s just told me he,s had a rebuild done by a guy in essex called jo, an ex Harte engineer!!! meant to be exteremly good , has anyone heard of him as im definately thinking its worth paying same kinda money but having the new stuff as RS SPECIALIST says. Thanks mate for the advice .
I,m a devoted cosworth fan and want the best , i know i said i dont mind paying tht price but maybe i,ve gone down the wrong road here !!!!! any more ideas,s in the essex area where i could take this instead will be appreciated soz 4 long thread .
have just spoke to a friend ive not seen for a long time didnt even know if he still had his saff , he,s just told me he,s had a rebuild done by a guy in essex called jo, an ex Harte engineer!!! meant to be exteremly good , has anyone heard of him as im definately thinking its worth paying same kinda money but having the new stuff as RS SPECIALIST says. Thanks mate for the advice .
I,m a devoted cosworth fan and want the best , i know i said i dont mind paying tht price but maybe i,ve gone down the wrong road here !!!!! any more ideas,s in the essex area where i could take this instead will be appreciated soz 4 long thread .
#7
Super Moderator
iTrader: (12)
thanks guys for the reponse, its actually gonna be just over 2 grand so now i,m gonna have a rethink for the go ahead, i know its my money but i h8 the idea of saying to them i,m not up 4 it.
have just spoke to a friend ive not seen for a long time didnt even know if he still had his saff , he,s just told me he,s had a rebuild done by a guy in essex called jo, an ex Harte engineer!!! meant to be exteremly good , has anyone heard of him as im definately thinking its worth paying same kinda money but having the new stuff as RS SPECIALIST says. Thanks mate for the advice .
I,m a devoted cosworth fan and want the best , i know i said i dont mind paying tht price but maybe i,ve gone down the wrong road here !!!!! any more ideas,s in the essex area where i could take this instead will be appreciated soz 4 long thread .
have just spoke to a friend ive not seen for a long time didnt even know if he still had his saff , he,s just told me he,s had a rebuild done by a guy in essex called jo, an ex Harte engineer!!! meant to be exteremly good , has anyone heard of him as im definately thinking its worth paying same kinda money but having the new stuff as RS SPECIALIST says. Thanks mate for the advice .
I,m a devoted cosworth fan and want the best , i know i said i dont mind paying tht price but maybe i,ve gone down the wrong road here !!!!! any more ideas,s in the essex area where i could take this instead will be appreciated soz 4 long thread .
and dont ecven think about Burtons,a mate had one built there cost him 4K its was shocking,we had to take it all apart and re clean and assemble the entire engine
Last edited by Dirty Harry; 13-05-2009 at 03:43 PM.
Trending Topics
#9
If money wasnt an issue i,d be having a £3000 plus all new parts build from someone like Julian Godfrey or MAD , but its outta my price range .
i know theres a lot of bandits out there , i dunno whether th mention the company i,ve taken it to but i want best for my money which doesnt seem to be the case from what u guys have said. They are def not bandits but seems now not tht good of a deal
Last edited by opposite lock; 13-05-2009 at 04:12 PM. Reason: wrong info
Thread
Thread Starter
Forum
Replies
Last Post
155lee
Ford RS Turbo Parts for Sale
20
24-10-2015 11:11 AM