155lee

iTrader: (10)

where can i get a new ford rack cheap,i tried ford and they wanted nearly £300 for 1.is there anywhere got a load or is there a decent refurbisher about that could do it?i have a bit of play on the n/s end of the rack.ta,lee

STUCOS

iTrader: (8)

Lee you can change the track rods them selves

cheeRS stu

kosman

as above,60quid from sdl for the rack ends,i had mine done a few weeks ago.

Mike1

Who are 'sdl' out of interest?

155lee

iTrader: (10)

its the rack itself,not the rod ends that screw into it.the rack lifts up and down about 4mm when you take a hold of it.im going to ask at my local factors today.stu,you got them arms powdercoated yet?

col cos1

iTrader: (5)

reconned racks in my experiance have been pish,youl need to find someone good to do it,my mate had to do 3 on a sierra and charge them for labour aswell due to play

155lee

iTrader: (10)

same here,i had 2 in a row on my rst,i have bought a 2nd hand 1 from paul linfoot till i can justify the £300 ford want,no matter how much i buy i still aint getting a discount yet at my local ford garage!

col cos1

iTrader: (5)

i bought a second hand one and its been fine,no play but had to get tracking properly set up after it,was well dodgy

STUCOS

iTrader: (8)

Lee yes arms are powder coated,but not fitted lol you wanting the polly bushes back,that i took out,

lee i get discount at ford if any good to you

cheeRS stu

tabetha

A lot of factors can send them away, or there is a great place in wales, who also do the 2wd rubber type flexy coupling as well in shaft.
Manual racks of 2.7:1 are available new now for £70, for anyone that does track days etc, or just wants manual rack.
tabetha