rs50087

is there a difference between a cossie 4*4 or 2wd shell and a normal sierra shell?I know that 4*4 has a different tunnel.

Paulo P

There are cut outs on the front chassis rails for the driveshafts too I think.

dojj

iTrader: (3)

and there are other differences between the 89 and 90 spec shells too

dojj

iTrader: (3)

but thats not to say that the 89 stuff won't fit to the 90 spec shells, but the doors will need a little "adjusting" as the door locks are different and they need "persuading" to fit (with a hammer and a drift but i'm talking 2 or 3 mm here)

rs50087

Nothing else.no strengthening in the cossie shells?

damo86

so would you be able to place all cosworth running gear and engine in to a xr4x4 without any modifications to the chassis?

nellyscossy

a cossy shell is different from a pinhead shell...you cant tell from the outside but the welding of some of the internal panels is different around the rear shelf/back seat area..there are extra bits welded in

dojj

iTrader: (3)

yes

Mr 19"

Hello Rolf! Johnny Lehti in sweden here. There is also strengthening in the gearboxtunnel!