Think I may have spun a bearing on track today so had enough and time for something else.

Majority of parts are either new or reconditioned around a year old at the most. Have kept receipts for everything. Larger parts will require collection and prefer payment via paypal or cash on collection. PM me for prices.

Off the top of my head;

Koni adjustables with Spax springs (35mm drop) new 3 months ago
Team Dynamics Pro Race with Yokohama tyres loads of tread left as hardly used
Rebuilt bottom end with new pistons, rods, ARP bolts and ACL bearings
Skimmed cross hatch head (very rare), new valves, guides, stem seals, new std cam kit
Stage 1 T3 with 360 bearing rebuilt by Wilky on here a few months ago
Exhaust Manifold
Bailey Oil separator with fitting kit
Pro Alloy header tank
Full Magnex exhaust with poly bushes
Newish battery/starter/alternator loom
Uprated coil
Dizzy with new cap and rotor
All new engine sensors including thermo time switch
MFI ECU with 195 chip (bought from Sitech)
Roose coolant hoses (black)
Roose boost hoses (black)
MFI metering unit in perfect working order)
New MFI injectors
Fuel lines
Spax strut brace (never fitted)
Spare 1.6 MFI head
90 spec Recaros (drivers bolster foam showing a little wear but no rips)
90 spec door cards (drivers side sagging a bit but no rips)
Dash no holes or cracks
MOMO steering wheel and boss
Puma gear shifter (short shift)
Airtec FMIC with fans
Recored standard radiator
90 spec bumpers (recently painted and no cracks)
Bonnet with vents (recently painted but drilled for bonnet pins)
All glass (heated screens) and both electric mirrors
90 spec spoiler ( abit pink but not cracked and has all covers in place)
Rust free doors and boot lid
Standard rear lights
Private plate 'B2 ESC'

 

How much for konis

 

hi mate how much for reg plate

 

How much for the bottom end mate and how long ago was it rebuilt?

 

Price posted for the puma Gear shifter please

 

Price posted for the turbo on the manifold please, did it hold boost well and does it come with an actuator?

EDIT: Also, I feel I should point out that you could have a look at the bearings with the engine in the car,
before you start ripping it apart and regretting it!

 

how much for coolant an boost hoses?

 

what size are the wheels?

 

Location and price on the front recaros please

 

16" wheels mate am in Dunfermline.

 

Having slept on it I agree completely. It's only a slight knock at certain points under load so I coasted back to the pits and towed her home.

Tbh I think I would get more Ł breaking her but would need everything to sell first and there is obviously no guarantees of that. However it's a hassle that I
don't need as I work away from home during the week

 

How much for the boot hatch and spoiler? Im near St. Andrews, so can collect.

May even have a few other bits and pieces off you, will get back to you on that one.

Ryan

 

Are you still breaking or not?

 

Dunno was hoping for more interest to justify it.

 

If I were to fix the knock how much do you guys think it's worth to sell as a whole?

 

how much for 2 front windows mate

 

Im interested in the rolling chassis. If you do split.

 

interested in the radiator? any pics and price?

 

Hello mate, I'm interested in :

- fuel computer + sensors + loom
- heated screen loom + switch
- electric mirrors + loom + switch
- header tank and maybe oil sperator
- side signals
- and depending on shipping price : electric windowd motors and rear wiper motor
- ...

Thank you.

Cheers.

 

Price on front bumper please?

 

How much 4 the koni's mate?

 

how much for the front bumper mate cheers mike

 

Where about in dufermline are you?

I will take the front seats if you brake

 

hi mate do you have a complete water temp gauge for sale?

 

ib b interested in a few bits, but just the distance!

 

Rear arb, heated front screen, recaros and puma linkage...
Prices please!

 

After trying to fix the bottom end it is fooked. After breaing up wi the missus and sorting that mess out I am planning a move to Oz so everything needs out my garage ASAP!!!

Wheels and ST170 brakes sold already.

I still have my Gotech and braided loom sitting at Sitech (Ł250)

Please PM me so as not to clog the thread. The car is in Dunfermline but I work in Aberdeen during the week. Prefer collection in person etc.

OMP strut brace
http://i595.photobucket.com/albums/t...2022012071.jpg

Passenger electric mirror
http://i595.photobucket.com/albums/t...2022012070.jpg

EFI flywheel
http://i595.photobucket.com/albums/t...2022012069.jpg

Starter motor (reasonably new works perfect)
http://i595.photobucket.com/albums/t...2022012068.jpg

Magnex (full system included)
http://i595.photobucket.com/albums/t...2022012067.jpg

MFI fuel lines and recent injectors
http://i595.photobucket.com/albums/t...2022012065.jpg

Polished charge carrier & newish sensor
http://i595.photobucket.com/albums/t...2022012064.jpg

Bonnet vent (no cracks all mounts intact)
http://i595.photobucket.com/albums/t...2022012059.jpg

MOMO steering wheel boss
http://i595.photobucket.com/albums/t...2022012058.jpg

Loom clips
http://i595.photobucket.com/albums/t...2022012055.jpg

Gen ford gasket
http://i595.photobucket.com/albums/t...2022012054.jpg

Vac take off
http://i595.photobucket.com/albums/t...2022012053.jpg

Headlight adjustor covvers (new)
http://i595.photobucket.com/albums/t...2022012052.jpg

MOMO gear knob
http://i595.photobucket.com/albums/t...2022012051.jpg

Suspension pinch bolts (new)
http://i595.photobucket.com/albums/t...2022012050.jpg

Cam pulley bolt (new)
http://i595.photobucket.com/albums/t...2022012049.jpg

Fuel filter pipe
http://i595.photobucket.com/albums/t...2022012048.jpg

Std charge carrier pipe
http://i595.photobucket.com/albums/t...2022012047.jpg

Std MFI airbox
http://i595.photobucket.com/albums/t...2022012046.jpg

Blue injectors (2 sets available)
http://i595.photobucket.com/albums/t...2022012045.jpg

XR3i accelerator cable for EFI conversion
http://i595.photobucket.com/albums/t...2022012044.jpg

XR3i pedal for EFI conversion
http://i595.photobucket.com/albums/t...2022012043.jpg

Std cam pulley
http://i595.photobucket.com/albums/t...2022012041.jpg

Gen Ford expansion tank cap
http://i595.photobucket.com/albums/t...2022012039.jpg

EFI HT leads
http://i595.photobucket.com/albums/t...2022012036.jpg

Braided fuel line (Filter to fuel rail for EFI conversion NEW)
http://i595.photobucket.com/albums/t...2022012035.jpg

Wiper arms
http://i595.photobucket.com/albums/t...2022012034.jpg

Flywheel cover plate (for Series 1)
http://i595.photobucket.com/albums/t...2022012033.jpg

MFI manifold
http://i595.photobucket.com/albums/t...2022012032.jpg

Metering unit (Excellent unit and removed from working car)
http://i595.photobucket.com/albums/t...2022012031.jpg

Cossie T3 filter and GGR trumpet (for EFI conversion)
http://i595.photobucket.com/albums/t...2022012029.jpg

Bailey breather & fitting kit (some light surface scratches)
http://i595.photobucket.com/albums/t...2022012030.jpg

 

PMD BUDDY

 

How much posted for the new mfi injectors if still available?

 

Bang the prices up of all the parts bud

 

price delivered to gloucester on the radiator mate also the plastic clip the headlight sits on in the wing part .

 

Replies sent

 

boost control solinoid available? how much posted please too newcastle upon tyne

 

Dunno what u mean. Is that the bleed valve?

 

think he means the amal valve mate

 

need full loom mate with fuse box etc?

 

Is the engine loom separable from the main car loom?

 

dont think so mate, its all the one

 

Sounds like a dash out job! R u local cos ur welcome to have a go removing it then

 

lol am in ireland mate, if its a good 90spec loom fuse box il pay the right money for it