Series 2 rst parts. Good parts not std!
#1
Series 2 rst parts. Good parts not std!
Hello peeps, breaking my bonus turbo 2 move on 2 bigger plans.
So i have the following parts for sale.
Engine 2.0 zvh efi, std rebuilt bottom end with pistons skimmed 0.8mm. Head is efi with double valve springs piper vernier and newman solid lifters, felpro headgasket. Done a max of 1500 miles at low boost. £300 SOLD!
series 2 lsd box. £200
4 padel cluthch kit, done a max of 1500 miles at low boost. £150
airtech alloy rad with 1, 9" fan and 1, 11" fan SOLD!
grs intercooler (the pipe work on the top out let has been remade, due 2 a mupet cuttin it off at som point) £150
megasquirt ecu and loom SOLD!
series 1! fuel tank nearly new! and fuel pump £100
turbo is stage 3 t3 exhaust housing with 4x4 cossy comp housing done a max off 700 miles never seen more than 10psi it cost me £800! will take £400 SOLD!
suspension is series 2 std fully polly bushed, bottom arms swing arms antirole bars all included (everything there) £100
4x4 cossy calipers with 2wd cossy discs. SOLD!
Exhaust, stainless with lamder sensor fitting 4in outward roled tail pipe (has a dent in it were it passes the sump) £90
corvette injectors, same flow rating as dark greens (spot on 4 the megasquirt) SOLD!
steering rack max of 18months old £15
Brake compensators £20
gear linkages £30
Drive shafts £25 each
May have other little bits and bobs i havent listed. txt or call me on 07851724052.
Thanks Rob.
So i have the following parts for sale.
Engine 2.0 zvh efi, std rebuilt bottom end with pistons skimmed 0.8mm. Head is efi with double valve springs piper vernier and newman solid lifters, felpro headgasket. Done a max of 1500 miles at low boost. £300 SOLD!
series 2 lsd box. £200
4 padel cluthch kit, done a max of 1500 miles at low boost. £150
airtech alloy rad with 1, 9" fan and 1, 11" fan SOLD!
grs intercooler (the pipe work on the top out let has been remade, due 2 a mupet cuttin it off at som point) £150
megasquirt ecu and loom SOLD!
series 1! fuel tank nearly new! and fuel pump £100
turbo is stage 3 t3 exhaust housing with 4x4 cossy comp housing done a max off 700 miles never seen more than 10psi it cost me £800! will take £400 SOLD!
suspension is series 2 std fully polly bushed, bottom arms swing arms antirole bars all included (everything there) £100
4x4 cossy calipers with 2wd cossy discs. SOLD!
Exhaust, stainless with lamder sensor fitting 4in outward roled tail pipe (has a dent in it were it passes the sump) £90
corvette injectors, same flow rating as dark greens (spot on 4 the megasquirt) SOLD!
steering rack max of 18months old £15
Brake compensators £20
gear linkages £30
Drive shafts £25 each
May have other little bits and bobs i havent listed. txt or call me on 07851724052.
Thanks Rob.
Last edited by yogurtey; 23-01-2011 at 08:04 AM. Reason: parts selling
Trending Topics
#10
#11
The engine i would prefer 2 leave it as 1, but i will give it a little while and see what happens. The ms is ms1 v3 as far as i know. set up for edis (all comes with it) it was from mtech so i berlive they built it.
#17
All i know about the box is tha lad who i had it from said it was removed from a low milage s2 he didnt know how many, i have done rufly 1500 mile with this box. All spot on
#24
hi pal interested in the engine is the bottom end black top or silver top as i want a silver top and my friend wants a black top so could work both ways also i can see all the efi gear on the head but is it a efi head not mfi with inlet stuck on? also were about are you?
cheers in advance pall
cheers in advance pall
#25
It is a silver top bottom end, and yes it is a frst head not an mfi head. Im in brierley hill, near merry hil shopping centre
Last edited by yogurtey; 20-01-2011 at 04:16 PM.
#29
Hi mate, i'm from stourbridge
Have you still got the connectors for things like TPS, injectors etc and all the connectors for the inlet manifold (or do you know anyone with a broken shell local who i could get this stuff off?)
Cheers
Have you still got the connectors for things like TPS, injectors etc and all the connectors for the inlet manifold (or do you know anyone with a broken shell local who i could get this stuff off?)
Cheers
#32
Thread
Thread Starter
Forum
Replies
Last Post