Lots of S2 parts including rebuilt lsd box
#1
Part of the Furniture
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Dorset
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Lots of S2 parts including rebuilt lsd box
Chromed Rocker cover. I believe it has the mounts on top for the efi charge carriers. Check pictures.£35 posted.
Blue Samco boost hose with neck for dump valve. Blue but has faded with age and is quite dark. £15 posted
Recently re-built standard LSD box. Was on the car when I bought it but I have bought a CTS box. I was told it had done less that 2000 miles and was still bedding in. It seemd ok but I broke down on the way home so I have very little experience with it and no proof of re-build. Taking this into consideration £120.
Dash board. £20 (would have to check postage)
Centre consol. £15 posted
Silver painted S2 gearbox cradle. Paint flaked off in places, looks like it used to be orange £20 posted
Standard gearbox mount £10 posted
Handbrake plastic cover (bit that attaches to centre console). £10 posted
Proffesionaly made (not home built) Stealth shelf with holes underneath for 6x9's. £25 would have to check postage.
Glove box with door. £12 posted
Boot quarter panels. £13 posted
Rear bench including backrest. £25 (would have to check on postage.)
Carpet. Good condition. £20 (would need to check on postage)
Rear pillar interior plastics. £15 posted.
Gear stick gaitor. £5 posted
Take a look at the pictures below and pm me with interest and please use the thread so that I can fairly see who saw stuff first. With the bigger stuff I don't mind meeting people half way providing it's no more than around a hundred miles.
I've had interest in some of these bits already but most people have sort of faded away. Thanks for looking.
Blue Samco boost hose with neck for dump valve. Blue but has faded with age and is quite dark. £15 posted
Recently re-built standard LSD box. Was on the car when I bought it but I have bought a CTS box. I was told it had done less that 2000 miles and was still bedding in. It seemd ok but I broke down on the way home so I have very little experience with it and no proof of re-build. Taking this into consideration £120.
Dash board. £20 (would have to check postage)
Centre consol. £15 posted
Silver painted S2 gearbox cradle. Paint flaked off in places, looks like it used to be orange £20 posted
Standard gearbox mount £10 posted
Handbrake plastic cover (bit that attaches to centre console). £10 posted
Proffesionaly made (not home built) Stealth shelf with holes underneath for 6x9's. £25 would have to check postage.
Glove box with door. £12 posted
Boot quarter panels. £13 posted
Rear bench including backrest. £25 (would have to check on postage.)
Carpet. Good condition. £20 (would need to check on postage)
Rear pillar interior plastics. £15 posted.
Gear stick gaitor. £5 posted
Take a look at the pictures below and pm me with interest and please use the thread so that I can fairly see who saw stuff first. With the bigger stuff I don't mind meeting people half way providing it's no more than around a hundred miles.
I've had interest in some of these bits already but most people have sort of faded away. Thanks for looking.
Last edited by dandannydandan; 15-12-2010 at 07:53 AM.
#3
Part of the Furniture
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Dorset
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
They look ok to me pal. I don't know how old they are. They were on the new box I bought but I already have a set and don't really need them. They may be spoken for though so I'll have to PM you if they don't go.
#6
Part of the Furniture
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Dorset
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
I really don't know to be honest. The stamp reads SX428T. It doesn't seem like a particularly lary cam as the car idled nicely. The car boosted nicely from really low down the rev range. It's my first experience of a Newman Cams camshaft but I was quite pleased with it and they appear to get good write ups. I did consider putting this head onto my new engine but the thought of spending another £80 for a Burton gasket put me off.
Trending Topics
#8
Part of the Furniture
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Dorset
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
I'm afraid not. The previous owner built it. The porting and valve springs you can blatently see. Interestingly I've just done a google search on the camshaft stamp and it came up £210 from power engineering. Maybe not a Newman Cams camshaft. Do power engineering make their own camshafts?
#9
RSHoleinator
iTrader: (10)
I'm afraid not. The previous owner built it. The porting and valve springs you can blatently see. Interestingly I've just done a google search on the camshaft stamp and it came up £210 from power engineering. Maybe not a Newman Cams camshaft. Do power engineering make their own camshafts?
#18
I've found that life I needed.. It's HERE!!
#19
Part of the Furniture
Thread Starter
iTrader: (2)
Join Date: Jul 2009
Location: Dorset
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Yes mate I drove with it. Was on the car when I bought it 2.1 ZVH. I'm only selling cos I've bought a low comp short block burton engine. Was gonna keep it as a spare but I need a bit of cash to keep my project going. It barely tapped at all tbh. It's been out of the car for around a month. I really think it's bloody good and worth way more than it's up for but needs must lol.
Thread
Thread Starter
Forum
Replies
Last Post
steerfromdarear
Restorations, Rebuilds & Projects.
28
29-01-2016 06:14 PM
TrevCos
Alloy wheels and ICE for sale
2
13-09-2015 02:12 PM
rog
Cars for Sale
25
04-09-2015 12:10 PM
Roosie
General Car Related Discussion.
27
19-08-2015 12:16 AM