1.8 ZVH complete with H section rods & accralite pistons, compression ratio of 7.8:1. Has correct sump for RST and comes with modified engine mount and steel, lightened and balanced flywheel. The correct non-stretch head bolts are included too.

Everything to bolt in basically.

Engine ran consistant 105mph terminals at santapod and never used any oil. Hone marks still present on the bores too. Would make someone a nice reliable fast engine with a decent cylinderhead and camshaft added.

£400 collection only.











Magnecor 8.5mm HT leads. £25 delivered.



Series one ECU's Fuel & Ignition - Unkown chip but run well on my car with no problems. £45 delivered.



RST metering unit in good working order. £40 delivered



Nearly new S2 alternator £25 delivered.



Wizards of NOS Street blaster kit complete with 5 lb bottle (1/2 full), pulsoids, crossfire injector, TPS switch & micro switch, pressure gauge and associated connectors & switches. Will need some nylon piping as its been cut to suit an RST installation. Nylon piping is cheap and easily available. £300 (This kit cost over £600 and has been used twice.)





Good condition fuel injection petrol tank, pattern part. £40 Collection only.



Thanks for reading

Gary

 

Is it an MFI head?

 

Might be intrested in the head and vernier, what conditions the cam in ? how many miles has it covered and is it mfi or efi head ?

thanks

 

Yes its an MFI head.

 

Its an MFI head and the cam has done approximately 5K with the head only covering about 2K along with the vernier.

Ive had no problem with the cam and the engine was very quiet before being pulled apart and run a 14.0 @ 104 on the last time it was driven which was central day @ the pod.

 

I'll have the exhaust please provided it's complete with downpipe?

 

Would you sell head without cam?if so how much?Ive not long had my Piper 285 t2 cam in my car.

 

I would prefer not to split them but if the offer was right for the head only then I would probably consider it.

 

is the head and cam still available?

 

Yes they are mate.

 

what samco hoses do you have? colour?

 

Ive got some blue S1 boost hoses, blue S1 radiator hoses & blue S1 auxillary hoses (basically everything else.).

What you after exactly?

 

awrite mate still got the back disc conversion stuff? interested in that!

 

Yes mate, still for sale!

 

sorry to jump on smitsturbo point but interested in the water hoses and maybe the auxillary hoses so 2nd dibs please

 

smitsturbo hasnt mentioned them again after his post above so there still up for sale mate should you want them?

The radiator hoses are above in the post with a picture and a price but i'll have to get a picture of the auxillary ones tonight and add them to the advert above.

Just let me know if your interested.

Gary

 

pm'd

 

pm's replied.

 

Seats and dash to me please pal

 

If he does not wants the seats I will have them is it 65 each

Cheers Joe

 

if ya still got em gary, im guessing i should take the coil and leads, cant run original twin coils for ever can I, stick em to one side, as will be seeing you in just over 3 weeks matey

 

Wont fit a coil pack mate im afraid. Coils no good for an Evo either mate!! lol

 

List updated.

CheeRS.

 

rite me wants rear disc conversion but aint got a scooby how is all works, no good wi technology haha

 

top man, hoses received today many thanks

 

has the rear disc conversion sold yet? very interested.

 

do you still have the stage 3 head?
also is this ready just to bolt the cvh head and manifolds and ancillaries to it?

 

Did the seats sell?

Joe

 

Seats and head are sold, but rear disc conversion is still for sale.

 

where abouts are you based mate?

 

pm'd you mate

 

In luton just of Junction 10 M1.

And all PM's replied.

 

Pm'd you back mate

 

Prices revised.

 

Do you still have the block?

 

Is your zvh block still for sale?

 

Yes mate I do.

 

Ideal, what parts will I need to get to fit this into my mk3 frst?

 

pm sent

 

Pm sent about the rear brakes