Big spec CVH engine - NOW ON EBAY WITH PICTURES
#1
PassionFord Post Whore!!
Thread Starter
Join Date: Mar 2005
Location: London
Posts: 4,301
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
http://cgi.ebay.co.uk/RS-Turbo-CVH-E...QQcmdZViewItem
to a change of plan on a project this is now for sale.
a 1600 cvh engine complete which was built originally bu paul eagleton
basic spec of engine is:
Brand new cam (run for 20 minutes)
CVH 36 CAM / Brand new venire pully
Stage 3 Head
Cosworth racing pistons
Steel rods
Big Valve head / oversize exhaust ports
All new gaskets and studs
Re usable rubber rocker cover gasket
Polished thermostat housing
Stage 3 T3 Turbo (Polished)
Port machined inlet
Green injectors
OMEX 500 with loom
Brand new 3 bar map sensor
Brand new sensors from OMEX
Brembo Calipers
Lots of chrome (rocker cover, cross over pipe)
EFI fly wheel
Brand new Ford Plugs and leads
also has a gearbox with it, which i think is a series 2 box but will have to check on that and the clutch.
to a change of plan on a project this is now for sale.
a 1600 cvh engine complete which was built originally bu paul eagleton
basic spec of engine is:
Brand new cam (run for 20 minutes)
CVH 36 CAM / Brand new venire pully
Stage 3 Head
Cosworth racing pistons
Steel rods
Big Valve head / oversize exhaust ports
All new gaskets and studs
Re usable rubber rocker cover gasket
Polished thermostat housing
Stage 3 T3 Turbo (Polished)
Port machined inlet
Green injectors
OMEX 500 with loom
Brand new 3 bar map sensor
Brand new sensors from OMEX
Brembo Calipers
Lots of chrome (rocker cover, cross over pipe)
EFI fly wheel
Brand new Ford Plugs and leads
also has a gearbox with it, which i think is a series 2 box but will have to check on that and the clutch.
Last edited by Cowboi; 12-08-2008 at 07:10 PM.
#4
PassionFord Post Whore!!
Thread Starter
Join Date: Mar 2005
Location: London
Posts: 4,301
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
would like to sell the whole lot together. but if offers came in on pretty much all parts seperately then i may split it.
it was an mfi block but has had the cps hole drilled.
we was going to run the car as efi with an efi loom using the cps.
it was an mfi block but has had the cps hole drilled.
we was going to run the car as efi with an efi loom using the cps.
#6
PassionFord Post Whore!!
Thread Starter
Join Date: Mar 2005
Location: London
Posts: 4,301
Likes: 0
Received 0 Likes
on
0 Posts
#7
PassionFord Post Whore!!
iTrader: (2)
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Spec as follows
Block - acid dipped and 0.5 overbore. The engine was still running fine when I took it apart so it's not as if a previous failure caused the rebuild. c.90k miles on it when it came apart
Cosworth forged racing pistons (7.5cr IIRC but worth double checking by measuring). 0.5 overbore.
Farndon Steel rods - standard 1.6CVH length.
Vandervall bearings
Reground crank
Fully balanced with flywheel.
New ford oil pump.
Block - acid dipped and 0.5 overbore. The engine was still running fine when I took it apart so it's not as if a previous failure caused the rebuild. c.90k miles on it when it came apart
Cosworth forged racing pistons (7.5cr IIRC but worth double checking by measuring). 0.5 overbore.
Farndon Steel rods - standard 1.6CVH length.
Vandervall bearings
Reground crank
Fully balanced with flywheel.
New ford oil pump.
Trending Topics
#12
PassionFord Post Whore!!
Thread Starter
Join Date: Mar 2005
Location: London
Posts: 4,301
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
if in the next week or so it dont sell complete then i'll price up the bits seperately and pm the people interested. just wanna let it run for a bit longer and see if it all goes together.
so if anyone else wants bits from it post up what bit or pm me and i'll sort some prices out soon.
so if anyone else wants bits from it post up what bit or pm me and i'll sort some prices out soon.
#14
PassionFord Post Whore!!
Thread Starter
Join Date: Mar 2005
Location: London
Posts: 4,301
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
this is still avaliable and looks like it will now be broken down and sold it bits.
pm me with any offers on the parts.
dont really wanna take the bottom end apart so would like some one to buy it complete (is got farndon steel rods and cosworth racing pistons in it)
i will get some pictures up asap.
pm me with any offers on the parts.
dont really wanna take the bottom end apart so would like some one to buy it complete (is got farndon steel rods and cosworth racing pistons in it)
i will get some pictures up asap.
#16
PassionFord Post Whore!!
Thread Starter
Join Date: Mar 2005
Location: London
Posts: 4,301
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
it would probably be worth having the inlet manifold with it as they were ported together. would be looking somewhere around the 1750 mark.
was after about 2600 for the lot so i'll have to go through everything and price it all up and get a propper list up.
was after about 2600 for the lot so i'll have to go through everything and price it all up and get a propper list up.
#17
Too many posts.. I need a life!!
Join Date: Jul 2005
Location: Herts(under a s2 with a centrino laptop)
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
I could be interested in this lot for the right price.
Brand new cam (run for 20 minutes)
CVH 36 CAM / Brand new venire pully
Stage 3 Head
Cosworth racing pistons
Steel rods
Big Valve head / oversize exhaust ports
All new gaskets and studs
Re usable rubber rocker cover gasket
Polished thermostat housing
Stage 3 T3 Turbo (Polished)
Port machined inlet
Brand new cam (run for 20 minutes)
CVH 36 CAM / Brand new venire pully
Stage 3 Head
Cosworth racing pistons
Steel rods
Big Valve head / oversize exhaust ports
All new gaskets and studs
Re usable rubber rocker cover gasket
Polished thermostat housing
Stage 3 T3 Turbo (Polished)
Port machined inlet
#28
I've found that life I needed.. It's HERE!!
Join Date: Apr 2005
Location: London
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Last edited by Urban Legend; 12-08-2008 at 11:33 PM.
#32
I've found that life I needed.. It's HERE!!
Join Date: Apr 2005
Location: London
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
Hi this is now back on ebay as i broke ebay rules by trying to put people off using paypal!! (why cancell it on the last day though??) anyway please bear this in mind when bidding as im already losing out on big money, don't want paypal mugging me as well!!
new link here
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=190247385063
Thanks for looking!
new link here
http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=190247385063
Thanks for looking!
Thread
Thread Starter
Forum
Replies
Last Post
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM