Breaking 4x4 saph cos in ebony
#1
PassionFord Post Whore!!
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: south wales, swansea
Posts: 6,807
Received 0 Likes
on
0 Posts
Breaking 4x4 saph cos in ebony
Ok as some of you may know I'm about to take delivery of a cracking shell from slider that is basically complete bar the following items so these bits are NOT for sale:
Engine
Box
Transfer box/shafts etc
Fuel pump (only standard anyway)
Rear brakes (rough anyway)
Wheels
Obviously if anythings in better condition on my old car I will sell the worse item on here but that's not likely as most of my stuff was standard anyway.
Any advice on price welcomed and offers on any parts considered,postage is possible on most items but on a lot of bigger parts I'd prefer collection.
I work away so I'm not always about to answer queries but there's always someone here who can help with the various items that maybe of interest.
So off the top of my head:
4x4 bonnet with vents in ebony, no rust painted 3 years ago very clean
£150 Ono
Front bumper again painted and totally complete with dogs etc,no marks or scratches
£140 Ono
Standard suspension in good order £40 Ono
Front calipers and standard discs,will require work as car stood a long time but cheap,vht painted red £50 Ono
Rear discs as above £free to collector
Rear beam set up,polybushed,surface rust but handy as a spare to blast up and paint in the winter etc £150
Diff £75
Prop £40
Doors,no rust and very good seals £50 each
Boot,lock removed and again superb order,no rust £50
Spoiler,all fixing points good £40
Headlights £25 each
Rear tinted lights £30 set
Number plate panel etc £offers
Side sills (not sure on jacking point covers) £30 pair
Rear bumper £40
Very Good carpet from gary@rs classics £40
Leather trim,pm me for options as I have a few bits lying round,trim in the car has usual drivers seat wear but I have a mint passenger seat and very good door cards also,happy to split them if required
£various
Shell with logbook&id ,only really useful for cutting out the floors and inner wings for an escort project IMO but its fully legit and hpi clear which may help with the BIVA/SVA process.Will photocopy the history and provide a full reciept with the car. Sorry I.d not for sale separately.
£offers but cheap
Various plastics £offers but very cheap
Heated screens £ 50 each but will see after removal!!!
Dash,grey not butchered £30
Clocks showing 36000 £30
Probably a few more bits I've forgotten about.
The car to all intents and purposes was a good well looked after motor but sadly the rot has got at it and I have really run out of interest in it now,it's not a basket case if someone wants to offer me say around a grand for the car minus the bits above I need but it needs sills,the roof is bubbling and seat belt points to be good again.
It has had a lot of welding done in my possession,namely rear legs,jacking points and some sill work but in all honesty that has held up ok it's just ran out of my patience now.
Might make a good track motor with a granny cossie motor in it but I'm guessing breaking it will be the end game.
Reply or pm on here is best.
Cheers Vaughan.
Will get pics up ASAP.
Engine
Box
Transfer box/shafts etc
Fuel pump (only standard anyway)
Rear brakes (rough anyway)
Wheels
Obviously if anythings in better condition on my old car I will sell the worse item on here but that's not likely as most of my stuff was standard anyway.
Any advice on price welcomed and offers on any parts considered,postage is possible on most items but on a lot of bigger parts I'd prefer collection.
I work away so I'm not always about to answer queries but there's always someone here who can help with the various items that maybe of interest.
So off the top of my head:
4x4 bonnet with vents in ebony, no rust painted 3 years ago very clean
£150 Ono
Front bumper again painted and totally complete with dogs etc,no marks or scratches
£140 Ono
Standard suspension in good order £40 Ono
Front calipers and standard discs,will require work as car stood a long time but cheap,vht painted red £50 Ono
Rear discs as above £free to collector
Rear beam set up,polybushed,surface rust but handy as a spare to blast up and paint in the winter etc £150
Diff £75
Prop £40
Doors,no rust and very good seals £50 each
Boot,lock removed and again superb order,no rust £50
Spoiler,all fixing points good £40
Headlights £25 each
Rear tinted lights £30 set
Number plate panel etc £offers
Side sills (not sure on jacking point covers) £30 pair
Rear bumper £40
Very Good carpet from gary@rs classics £40
Leather trim,pm me for options as I have a few bits lying round,trim in the car has usual drivers seat wear but I have a mint passenger seat and very good door cards also,happy to split them if required
£various
Shell with logbook&id ,only really useful for cutting out the floors and inner wings for an escort project IMO but its fully legit and hpi clear which may help with the BIVA/SVA process.Will photocopy the history and provide a full reciept with the car. Sorry I.d not for sale separately.
£offers but cheap
Various plastics £offers but very cheap
Heated screens £ 50 each but will see after removal!!!
Dash,grey not butchered £30
Clocks showing 36000 £30
Probably a few more bits I've forgotten about.
The car to all intents and purposes was a good well looked after motor but sadly the rot has got at it and I have really run out of interest in it now,it's not a basket case if someone wants to offer me say around a grand for the car minus the bits above I need but it needs sills,the roof is bubbling and seat belt points to be good again.
It has had a lot of welding done in my possession,namely rear legs,jacking points and some sill work but in all honesty that has held up ok it's just ran out of my patience now.
Might make a good track motor with a granny cossie motor in it but I'm guessing breaking it will be the end game.
Reply or pm on here is best.
Cheers Vaughan.
Will get pics up ASAP.
#7
msd tooned 380+ bhp
Hi pal
Sent you a p.m but not sure if you received it?
Interested in rear bumper, could you tell me what conditions like??
I.e are all bracket intact?, any cosmetic damage?
Also what extra cost would you be wanting for postage/courier up to Lancashire
Cheers
Sent you a p.m but not sure if you received it?
Interested in rear bumper, could you tell me what conditions like??
I.e are all bracket intact?, any cosmetic damage?
Also what extra cost would you be wanting for postage/courier up to Lancashire
Cheers
Trending Topics
#8
PassionFord Post Whore!!
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: south wales, swansea
Posts: 6,807
Received 0 Likes
on
0 Posts
Have a dump valve but for now that's staying with the engine unless whoever sets it up says otherwise or I get fed up with the sound!!!
It's a bailey one as well.
Yep sure will mate,although I'm not 100% certain one of them has a single gauge pod in it? I may have another standard one there.
Deffo got b pillars,will see the condition/colour of them later.
Make me an offer once you see the pics.
Never got the pm mate but afaik the bumper is perfect,it was sprayed off the car so the new paint is everywhere so a good job.
It feels solid on the car so i would think the brackets are ok but if you can advise me on what I should look for then I'll let you know.
As for courier postage I have no idea,happy to make some enquiries though.
It's a bailey one as well.
Yep sure will mate,although I'm not 100% certain one of them has a single gauge pod in it? I may have another standard one there.
Deffo got b pillars,will see the condition/colour of them later.
Make me an offer once you see the pics.
It feels solid on the car so i would think the brackets are ok but if you can advise me on what I should look for then I'll let you know.
As for courier postage I have no idea,happy to make some enquiries though.
#9
msd tooned 380+ bhp
Cheers for reply pal
Rear bumper should have 2 metal brackets in the rear of the bumper,should hopefully be still attached to bumper pretty solid, also there should be 2 square looking plastic brackets on the sides of the bumper where a plastic push & twist fastener slots in (1 each side), also 2 plastic pegs above the square looking brackets again (1 each side)
If you could possibly get some photos of the outside of bumper & inside where the above brackets are that would be much appreciated
If everything's how it should be will definatley have the bumper & if you make enquiries on postage will pay the extra
Cheers
Rear bumper should have 2 metal brackets in the rear of the bumper,should hopefully be still attached to bumper pretty solid, also there should be 2 square looking plastic brackets on the sides of the bumper where a plastic push & twist fastener slots in (1 each side), also 2 plastic pegs above the square looking brackets again (1 each side)
If you could possibly get some photos of the outside of bumper & inside where the above brackets are that would be much appreciated
If everything's how it should be will definatley have the bumper & if you make enquiries on postage will pay the extra
Cheers
#15
PassionFord Post Whore!!
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: south wales, swansea
Posts: 6,807
Received 0 Likes
on
0 Posts
Right guys after realising a lot of the bits on the other shell are 2wd plus I'm gonna be away now for approx 3 weeks I might as well say I'll suspend the thread for now until I get the car stripped and all the bits I need on and off and start it up again.
By all means reply to the thread but be aware I won't be selling anything except panels etc until mid April.
Thanks all.
By all means reply to the thread but be aware I won't be selling anything except panels etc until mid April.
Thanks all.
#19
PassionFord Post Whore!!
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: south wales, swansea
Posts: 6,807
Received 0 Likes
on
0 Posts
Not sure on how much post is but £10 for the mech,I'll double check it all works first as there's 3 new doors on the car and I can't remember if I kept the old ones (which were perfect).
Thread
Thread Starter
Forum
Replies
Last Post
Tank Mike
Ford Focus ST Parts for Sale
3
18-05-2016 09:38 PM
155lee
Ford RS Turbo Parts for Sale
20
24-10-2015 11:11 AM
truffleshuffle
Ford Sierra/Sapphire/RS500 Cosworth
1
10-09-2015 09:35 PM