200 block std bore + std-std crank + rods
#1
PassionFord Regular
Thread Starter
Join Date: Feb 2006
Location: R.O.I
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
200 block std bore + std-std crank + rods
hi chaps. i have for sale a standard bore 200 block in good condition . not a 99 block has a slight wear lip at the top of the bore but have checked them and there is less than .02mm taper and the bores are round.head problems forced the stripping of this engine.the block has been thoroughly washed and covered in a light grease.
std std crank in very good condition . journals are clean and round. the only issue with the crank is the fact that water was around the crank before this engine came to me and there are slight pitting marks on the main journals due to electrolysis. but the good news is that these are in the groove of the main bearings and will not affect the crank or bearing surfaces in the slightest. however im putting the crank up for reasonable money as i know some people will be concerned about this , although ive used cranks that suffered form this many times in the past on small engines and big.
the items are in ireland and will be shipped safely and securely. the price for the block is £600 and the price for the crank is £350 . there is also an option to anybody that wants both to pick up a cheap set of pistons and rods from this engine. also available are manifolds , turbo ,oil pump ,spray bar etc the head is also available cheap as it needs a repair.
i will do a good deal on multiple parts put on one pallet and i will cover 50% of shipping costs on all items as they are in ireland. they will be shipped within 48hrs after payment via paypal.
std std crank in very good condition . journals are clean and round. the only issue with the crank is the fact that water was around the crank before this engine came to me and there are slight pitting marks on the main journals due to electrolysis. but the good news is that these are in the groove of the main bearings and will not affect the crank or bearing surfaces in the slightest. however im putting the crank up for reasonable money as i know some people will be concerned about this , although ive used cranks that suffered form this many times in the past on small engines and big.
the items are in ireland and will be shipped safely and securely. the price for the block is £600 and the price for the crank is £350 . there is also an option to anybody that wants both to pick up a cheap set of pistons and rods from this engine. also available are manifolds , turbo ,oil pump ,spray bar etc the head is also available cheap as it needs a repair.
i will do a good deal on multiple parts put on one pallet and i will cover 50% of shipping costs on all items as they are in ireland. they will be shipped within 48hrs after payment via paypal.
Last edited by Gary Osborne; 24-11-2012 at 09:28 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post