Hart YB high flow plenum cover with fitting kit
07-09-2011, 03:48 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Hart YB high flow plenum cover with fitting kit
Hi dudes,
Decided that I won't be running the power I thought I might so this is up for sale!!
A straight swap on Escorts, and needing brake pipe and PAS mods on the 2WD models (which I have done!). 4wd Sapphires are apparently limited to the PAS mods too I hear...
It's been mirror polished and comes with the proper fixing kit as supplied with it, bolts, throttle bracket and throttle quadrant to keep it all neat.
Note - this takes the std 2wd / 4wd throttle body, and has the provision for a 2wd and 4wd fuel rail.
Looking for something close to what I paid for it - 500.
I am on 07968 365878
Thanks
Weeksy
Last edited by Weeksy; 09-09-2011 at 12:50 PM .
07-09-2011, 03:59 PM
10K+ Poster!!
Join Date: Jun 2004
Location: Huntingdon
Posts: 11,058
Crikey, looks very impressive now its been polished !
07-09-2011, 04:12 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
What size TB fits ?
07-09-2011, 04:18 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Std throttle body Mr
07-09-2011, 04:21 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Quote:
Originally Posted by
Weeksy
Std throttle body Mr
I have the ST TB
Steve
07-09-2011, 04:22 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Is that not the bolt pattern as the 2wd one?
07-09-2011, 04:23 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Is thart not the same bolt pattern as the 2wd one?
07-09-2011, 04:25 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
I think the bolt pattern is bigger on the ST TB, its 10mm bigger than STD
07-09-2011, 04:27 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Oh really?
07-09-2011, 04:30 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
I will phone Mr Moancock and ask his advice but im sure im correct, im not unbolting the TB from the car to find out lol
07-09-2011, 04:32 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
haha, affectionately known as eh?! Love it
07-09-2011, 04:34 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
small turbo throttle body is 70mm as there is one on my hart inlet
07-09-2011, 04:36 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
So it is true!
07-09-2011, 04:48 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Quote:
Originally Posted by
Weeksy
So it is true!
I called but he didn't answer, i have since been trying to measure it on the car lol
Steve
07-09-2011, 04:49 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Quote:
Originally Posted by
damien roe
small turbo throttle body is 70mm as there is one on my hart inlet
Can you tell me the distance between the bolt holes on the ST TB please, as i have a normal 2wd one i can compare the size on
Steve
07-09-2011, 04:55 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
from center of bolt to center of bolt 60mm and 70mm
07-09-2011, 04:55 PM
15000
Join Date: Mar 2008
Location: Seuzach
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Hello Weeksy,
07-09-2011, 04:56 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Quote:
Originally Posted by
damien roe
from center of bolt to center of bolt 60mm and 70mm
Will go and measure my 2wd one
Steve
07-09-2011, 04:58 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
Quote:
Originally Posted by
cossie_topaloglou
Hello Weeksy,
upload a pic of your engine bay
07-09-2011, 05:02 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
and small turbo escos
07-09-2011, 05:02 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
cossie_topaloglou
Hello Weeksy,
Hi there fella,
I can't see it being an issue, as it's bulkiest low down, and quite slender at the top to miss your brake set up.
At it's widest point you need to make sure you have approx 100mm from the face of the inlet runner / plenum mating face.
Thanks
Weeksy
07-09-2011, 05:07 PM
15000
Join Date: Mar 2008
Location: Seuzach
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
damien roe
upload a pic of your engine bay
Here you go!
Just wondering if the Hart inlet clears the ABS unit...
Thanks!
07-09-2011, 05:08 PM
15000
Join Date: Mar 2008
Location: Seuzach
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
Weeksy
Hi there fella,
Ok, I will measure it today if posible and get back to you!
07-09-2011, 05:10 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Quote:
Originally Posted by
damien roe
from center of bolt to center of bolt 60mm and 70mm
I just measured the 2wd one at 65mm between all bolt centers
Steve
07-09-2011, 05:11 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Its hard to say from here, but I will look on mine this eve and look at the shape of the ABS unit and the plenum.
07-09-2011, 05:12 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Damo, what is the bolt spacing on that ST TB dude?
07-09-2011, 05:12 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
Quote:
Originally Posted by
cossie4i_
I just measured the 2wd one at 65mm between all bolt centers
not good
07-09-2011, 05:13 PM
Too many posts.. I need a life!!
Join Date: Aug 2007
Location: Blackpool
Posts: 770
Likes: 0
If it was not polished I would of had this..
07-09-2011, 05:13 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
Quote:
Originally Posted by
Weeksy
Damo, what is the bolt spacing on that ST TB dude?
what you mean buddy
07-09-2011, 05:14 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
Quote:
Originally Posted by
turbomook
If it was not polished I would of had this..
powdercoat it
07-09-2011, 05:15 PM
TT T38 Power
Join Date: Apr 2005
Location: Somerset
Posts: 22,368
Quote:
Originally Posted by
damien roe
not good
Did you measure the ST TB one correctly ?
Steve
07-09-2011, 05:16 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, missed a response back there!
07-09-2011, 05:17 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Quote:
Originally Posted by
turbomook
If it was not polished I would of had this..
But polished it is! Sorry!
07-09-2011, 05:25 PM
PassionFord Post Whore!!
Join Date: Dec 2004
Location: The North
Posts: 9,665
Quote:
Originally Posted by
turbomook
If it was not polished I would of had this..
Hears mine powder coated anthracite
07-09-2011, 05:28 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
Quote:
Originally Posted by
cossie4i_
Did you measure the ST TB one correctly ?
of course i did across the top and down the side
07-09-2011, 05:29 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
That does look nice fella, I have to say.
07-09-2011, 05:30 PM
PassionFord Post Whore!!
Join Date: Dec 2004
Location: The North
Posts: 9,665
Just measured my 2wd throttle and it's 60mm between the centre of both bolt holes
07-09-2011, 05:32 PM
I've found that life I needed.. It's HERE!!
Join Date: Mar 2010
Location: ireland
Posts: 1,184
Quote:
Originally Posted by
BRAMMER
Just measured my 2wd throttle and it's 60mm between the centre of both bolt holes
i measured mine dead center of each bolt to dead center of the other
07-09-2011, 05:37 PM
Too many posts.. I need a life!!
Thread Starter
Join Date: Aug 2004
Location: Ford Country
Posts: 744
Likes: 0
Received 0 Likes
on
0 Posts
Looks like I wont be going to a ST escort plenum then!!
07-09-2011, 05:41 PM
PassionFord Post Whore!!
Join Date: Dec 2004
Location: The North
Posts: 9,665
2wd
07-09-2011, 03:48 PM
Hart YB high flow plenum cover with fitting kit
of course i did across the top and down the side