530bhp engine for sale
03-01-2010, 04:46 PM
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2008
Location: wiltshire
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
530bhp engine for sale
engine removed from my 3 door ele, just bottom end.
200 block, 6 long studs, wrc spray jets
carllio h section rods
4x4 uprated oil pump, with modded pick up pipe
big wing 2wd sump with 4 gate baffle plate
mahle pistons with valve cut outs
cooper ring block
£2200.00
i have stripped and checked engine and now reassembled all bearings ect are as new and engine has only done approx 4k.never burnt oil and was always 100% reliable
only removed as going big bhp and new block required for this.
200 block, 6 long studs, wrc spray jets
carllio h section rods
4x4 uprated oil pump, with modded pick up pipe
big wing 2wd sump with 4 gate baffle plate
mahle pistons with valve cut outs
cooper ring block
£2200.00
i have stripped and checked engine and now reassembled all bearings ect are as new and engine has only done approx 4k.never burnt oil and was always 100% reliable
only removed as going big bhp and new block required for this.
Last edited by cossyking; 05-01-2010 at 08:40 PM.
05-01-2010, 06:32 PM
#6
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2008
Location: wiltshire
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
engine
engine removed from my 3 door ele, just bottom end.
200 block, 6 long studs, wrc spray jets
carllio h section rods
4x4 uprated oil pump, with modded pick up pipe
big wing 2wd sump with 4 gate baffle plate
mahle pistons with valve cut outs
wire rung block
£2200.00
i have stripped and checked engine and now reassembled all bearings ect are as new and engine has only done approx 4k.never burnt oil and was always 100% reliable
only removed as going big bhp and new block required for this.
200 block, 6 long studs, wrc spray jets
carllio h section rods
4x4 uprated oil pump, with modded pick up pipe
big wing 2wd sump with 4 gate baffle plate
mahle pistons with valve cut outs
wire rung block
£2200.00
i have stripped and checked engine and now reassembled all bearings ect are as new and engine has only done approx 4k.never burnt oil and was always 100% reliable
only removed as going big bhp and new block required for this.
07-01-2010, 01:06 PM
#7
3 door resto in progress
iTrader: (5)
Join Date: Dec 2007
Location: hertford
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
engine removed from my 3 door ele, just bottom end.
200 block, 6 long studs, wrc spray jets
carllio h section rods
4x4 uprated oil pump, with modded pick up pipe
big wing 2wd sump with 4 gate baffle plate
mahle pistons with valve cut outs
cooper ring block
£2200.00
i have stripped and checked engine and now reassembled all bearings ect are as new and engine has only done approx 4k.never burnt oil and was always 100% reliable
only removed as going big bhp and new block required for this.
200 block, 6 long studs, wrc spray jets
carllio h section rods
4x4 uprated oil pump, with modded pick up pipe
big wing 2wd sump with 4 gate baffle plate
mahle pistons with valve cut outs
cooper ring block
£2200.00
i have stripped and checked engine and now reassembled all bearings ect are as new and engine has only done approx 4k.never burnt oil and was always 100% reliable
only removed as going big bhp and new block required for this.
cheers charlie.
Trending Topics
10-01-2010, 08:22 PM
#10
Too many posts.. I need a life!!
Thread Starter
Join Date: May 2008
Location: wiltshire
Posts: 554
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
rog
Cars for Sale
25
04-09-2015 12:10 PM
oilman
Trader Parts for Sale.
5
30-08-2015 08:37 AM