MSD chip with antilag/launch/wasted spark/closed loop
#1
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
MSD chip with antilag/launch/wasted spark/closed loop
I have a MSD chip for sale with all features, see description below :
- MSD (Evolution Chips so with S/N number) chip to be run with a standard engine internals with T4, 500 cooler and 55lb injectors. This made 427bhp/405lbft on the owner's car with this chip. The chip has got antilag and launch control, as well as supporting wasted spark and closed loop so top specs !
Buying that chip new from Stu would probably cost you over 600£ with all the above features.
Serious enquiries please
- MSD (Evolution Chips so with S/N number) chip to be run with a standard engine internals with T4, 500 cooler and 55lb injectors. This made 427bhp/405lbft on the owner's car with this chip. The chip has got antilag and launch control, as well as supporting wasted spark and closed loop so top specs !
Buying that chip new from Stu would probably cost you over 600£ with all the above features.
Serious enquiries please
Last edited by Mad Matt; 12-08-2009 at 10:13 AM.
#2
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
I am in the need of BBS RS wheels (16") so may exchange parts with cash or anything else.
Like these :
http://img.photobucket.com/albums/v1...2491medium.jpg
Like these :
http://img.photobucket.com/albums/v1...2491medium.jpg
Last edited by Mad Matt; 05-04-2009 at 07:53 AM.
#5
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Btw track control arm sold, but the alloy upright is still for sale.
May also swap parts with money and a pectel monitor with EGT input.
#7
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
BTT prices reduced, I'm not in a hurry, as engine is nearly gone so don't need money now, but will also consider exchange with the following parts I need :
- BBS RS 16" split rims
- front grpA strut brace (like the one Mike sells)
- 3 bar map
- front track control arms
- 909 bilstein all around
- sparco harness 4pt 3"
- BBS RS 16" split wheels
- "DTM-type" carbon rear view mirrors
- 4.44 chain kit
- pectel monitor with EGT input
- front diff strengthened plate
- BBS RS 16" split rims
- front grpA strut brace (like the one Mike sells)
- 3 bar map
- front track control arms
- 909 bilstein all around
- sparco harness 4pt 3"
- BBS RS 16" split wheels
- "DTM-type" carbon rear view mirrors
- 4.44 chain kit
- pectel monitor with EGT input
- front diff strengthened plate
Trending Topics
#8
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
EGR-antilag system prov sold !
Not to mention I also can take the engine at Ford Fair if needed, and FOR FREE !
And again all prices can be discussed, I sold the EGR system at 700£ delivered while it was advertised here at 800£ !
Not to mention I also can take the engine at Ford Fair if needed, and FOR FREE !
And again all prices can be discussed, I sold the EGR system at 700£ delivered while it was advertised here at 800£ !
Last edited by Mad Matt; 29-05-2008 at 05:28 PM.
#9
If your looking for bids then i'll offer you £100 for the toe link on my door , im in no hurry so mail it from the UK if you like .
#10
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Thank you Ryan, but won't go under 150£. Can do 150£ posted to your door tho. Have also 2 brand new Timken bearings for the rear group A mag beam. Cost a fortune, will let them go for 50£.
#23
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
peteh, just make me an offer. I have got a member there who might take nearly all the engine, including the crank, so I will let you know, both peteh and John.
Yes John, I have to sell lot of parts, because I am gonna start a school in september and therefore won't be able to finish the project, but I am keeping the seats (will go in my road saph ).
Yes John, I have to sell lot of parts, because I am gonna start a school in september and therefore won't be able to finish the project, but I am keeping the seats (will go in my road saph ).
#25
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Yes, mate.
But I may have sold the engine, I just hope the guy gets an answer quickly heh
In the meantime, I am open to offers for the GEMS DA36 display. Come one guys, that's the weapon :
Works WRC escort heh
But I may have sold the engine, I just hope the guy gets an answer quickly heh
In the meantime, I am open to offers for the GEMS DA36 display. Come one guys, that's the weapon :
Works WRC escort heh
#27
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
So lot of parts are prov sold now, waiting payment, here are the parts remaining :
- Fuel rail with braided hoses and aeroquip bits on it
- Grey injectors, good working state
- T34 maram shafted (247) with restrictor and actuator. Absolutly NO PLAY in the shaft comes with quick release .63 housing
- Big wing sump, with some work to upgrade the strength, comes with aeroquip bits also
- Mountune sump baffle new very rare
Also be sure to look at my "parts wanted" thread there, as I am also considering parts trading :
https://passionford.com/forum/cars-and-parts-wanted/241037-few-cosworth-parts.html
- Fuel rail with braided hoses and aeroquip bits on it
- Grey injectors, good working state
- T34 maram shafted (247) with restrictor and actuator. Absolutly NO PLAY in the shaft comes with quick release .63 housing
- Big wing sump, with some work to upgrade the strength, comes with aeroquip bits also
- Mountune sump baffle new very rare
Also be sure to look at my "parts wanted" thread there, as I am also considering parts trading :
https://passionford.com/forum/cars-and-parts-wanted/241037-few-cosworth-parts.html
#36
Rally nut
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Cumbria
Posts: 2,007
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the late answer, engine has been sold normally (will send you pictures of the block), but the turbo is still for sale, no pics yet of it, but you can't go wrong with it. Mint condition.
What remain of the engine is :
- Pectel P8 ECU with antilag, air/air injectors, water injection
- air/air injectors
- Pectel engine loom complete with air/air loom, ... including also a pectel monitor plug
- T34 group A with 34mm restrictor and 247 maram shaft, all in top condition
Open to offers on the rest of the parts.
What remain of the engine is :
- Pectel P8 ECU with antilag, air/air injectors, water injection
- air/air injectors
- Pectel engine loom complete with air/air loom, ... including also a pectel monitor plug
- T34 group A with 34mm restrictor and 247 maram shaft, all in top condition
Open to offers on the rest of the parts.