silky16v

iTrader: (1)

MSD Stage 3 Chip for L8 on T34, 803's (greens) & 3 bar for standard comp engine £150


Turbo Technics (P/N:S114) T34 Hybrid Turbo with 0.55 Exhaust Housing, cut-back blades, left hand threaded shaft no smoke or play in the shaft £350




Radtec 50mm RS 500 Intercooler £200 (provisionly sold)


Mongoose Full 3" Stainless complete with all box's & 3" rolled out tail-pipe £200

6 month old 4x4 Koni's & Chassis Dynamic -25mm Springs £175

Good standard Radiator & Fans £70



L8 Ecu complete with Standard Baby Board (Green stickered) £200

2x sets of Bosch 803's Greens fully flow checked £100


Engine is a 200 block rebuilt by PJ motorsport in 2004 with 0.50mm oversized Standard Comp Pistons, ARP Stud & Nut, new bearing threw-out
No wear marks on the bores and Honing marks still visable, engine was perfect running no smoke or knocks, car was running a MSD Stage 3 chip and holding 23psi of boost & drove home fine on thursday nite

Bottom-end complete with stud & nut £1000







OMP Strut Brace £25


Will updated with more parts tomorrow

All other parts also available the car is an Ebony Black 1992 4x4 Saph

let me know what you need all parts located in North West Cumbria

Postage available on all parts @ extra cost[/img]

saph-mad

DO U HAVE THE FRT BUMPER ?

Kelv

iTrader: (4)

have you got usable front discs and calipers?

and vague price pls matey.

silky16v

iTrader: (1)

yes it has been marked on the drivers side but i will get a photo tomorrow and put it up

silky16v

iTrader: (1)

yes it has got drilled & grooved front disc's and pads about half way down once removed tomorrow i'll get a pic for you

posted it'll be £75.00

Kelv

iTrader: (4)

Cool.

just pop a phone number over when you get chance mate and ill call and sort out funds with you.

its for the misses's car anyhow.

silky16v

iTrader: (1)

have removed most parts today will remove rest tomorrow and do a big update

2wd

you will have a PM shortly..

cameron2

Price for glovebox pls.

gil

any play in t34 shaft

silky16v

iTrader: (1)

sorry it was damaged

silky16v

iTrader: (1)

nope none at all perfect working condition has Turbo Technics
Part No: 114

jaimesdna

iTrader: (3)

how much for the head & what is the thickness?

silky16v

iTrader: (1)

i kept the head it had just been full rebuilt and measured 138.66mm

If you are need of a 4x4 head PM me and i'll let you know where there is a good head that measures 168.71mm

Yura

silky16v
But I see T34 Garett at your photo...

silky16v

iTrader: (1)

the turbo is a T34 unit with 360 deg bearing, lefthand shaft, cut-back blades, and a 0.55 exhaust housing

Turbo Technics call this a T35 Hybrid Unit

Yura

sorry but I dont understand. at the comr housing I see GARETT die on the photo. Which part of turbo made by Turbo Technics?

silky16v

iTrader: (1)

Upski

Pictures added for Injectors and MSD Chip

Twellsie

iTrader: (1)

do you have the plastic bit of trim that goes around the gear lever and houses the leccy window switch, is it

a, Unbroken

and

b, Black?

RST

iTrader: (3)

u have pm

westus1

iTrader: (6)

silky16v
is the price of exhaust include posting

mechanic28

iTrader: (5)

is that 200 block a proper ford one?

silky16v

iTrader: (1)

nope sorry postage not included

silky16v

iTrader: (1)

yes it is a ford block it is the original block the car was fitted with from the factory

silky16v

iTrader: (1)

Bump!

KSA-Cossie

iTrader: (4)

You have pm m8.

Enigma666

Turbo still for sale?

cameron2

Hi mate, im after a strut cup. The 1 that sits on the shocker under the arch. Pm price pls

TurboShed

Need 4x4 starter motor, and glove box hinges.

pieterjan

iTrader: (4)

Hi i need the distributor want you send it to belgium?

RS SHAUN

iTrader: (24)

you still got a L8 ecu mate

richard youll

do you still have the strut brace?