Crankcase breather valve
02-04-2012, 07:41 PM
#1
15000
Thread Starter
Join Date: Apr 2012
Location: uk
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Crankcase breather valve
I took this off today to have a look/clean of the thing and it seems a little odd that its that springy, how is it possible that the valve closes considering the spring pushes the diaphragm that hard?
Just for those who are curious the car is lumpy at idle and stutters around 1750-2100 rpm. The EGR, manifold e.t.c have all been off and cleaned but after 10-12 days the EGR valve was quite oily inside so i though i would take a look at the crankcase breather.
2006 Mondeo TDCI 115ps
Just for those who are curious the car is lumpy at idle and stutters around 1750-2100 rpm. The EGR, manifold e.t.c have all been off and cleaned but after 10-12 days the EGR valve was quite oily inside so i though i would take a look at the crankcase breather.
2006 Mondeo TDCI 115ps
Last edited by plumbobing; 02-04-2012 at 07:43 PM.
Thread
Thread Starter
Forum
Replies
Last Post
