Ford KA OBD Interface
#1
Virgin
Thread Starter
Join Date: Jun 2010
Location: Emmen, The Netherlands
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Ford KA OBD Interface
I have a European (Netherlands) 1998 Ford Ka 1.3i
In the drivers footwell there is a 16 pin OBD connection.
I have been thinking of buying a scanner to go onto it but I am a bit confused by all the different interfaces and protocals out there.
I have been looking at an Orange/Black/Blue ELM 327 v1.4 Bluetooth OBD II scanner on ebay since I am on a very limited budget.
If my reading is correct then this should be compatible with my car.
Can anyone verify this?
In the drivers footwell there is a 16 pin OBD connection.
I have been thinking of buying a scanner to go onto it but I am a bit confused by all the different interfaces and protocals out there.
I have been looking at an Orange/Black/Blue ELM 327 v1.4 Bluetooth OBD II scanner on ebay since I am on a very limited budget.
If my reading is correct then this should be compatible with my car.
Can anyone verify this?
#2
I've found that life I needed.. It's HERE!!
OBD2 (or OBD II) only exists in the United States of America and Canada.
In Europe it's called EOBD, but this is not mandatory until 2001.
If you're lucky an ELM works. Maybe check before you buy?
What do you want to do with the ELM interface? Abs, Airbag or things like that?
In Europe it's called EOBD, but this is not mandatory until 2001.
If you're lucky an ELM works. Maybe check before you buy?
What do you want to do with the ELM interface? Abs, Airbag or things like that?
#3
Virgin
Thread Starter
Join Date: Jun 2010
Location: Emmen, The Netherlands
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
OBD2 (or OBD II) only exists in the United States of America and Canada.
In Europe it's called EOBD, but this is not mandatory until 2001.
If you're lucky an ELM works. Maybe check before you buy?
What do you want to do with the ELM interface? Abs, Airbag or things like that?
In Europe it's called EOBD, but this is not mandatory until 2001.
If you're lucky an ELM works. Maybe check before you buy?
What do you want to do with the ELM interface? Abs, Airbag or things like that?
I want to read diagnostic data
#4
I've found that life I needed.. It's HERE!!
Well, I mean borrowing a scanner and actually trying if it works.
Or pay somebody to have it done for you.
Read WHICH diagnostic data?
Or pay somebody to have it done for you.
Read WHICH diagnostic data?
#7
Virgin
Thread Starter
Join Date: Jun 2010
Location: Emmen, The Netherlands
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
sorry but Why would I want to spend that kind of money to read diagnostic codes when I can get something for a 10th the price that may work and a 1/3 of the price that will work. Plus I already stated I am on a very limited budget so it's way out of my price range.
Last edited by Larkspeed; 03-04-2012 at 11:11 AM.
Trending Topics
#8
Regular Contributor
Join Date: May 2004
Location: Trowbridge, Wiltshire
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Autel AL301 only Ł35.99 from UK Parts Direct
http://www.ukpartsdirect.com/catalog...2/category/38/
Good little scanner for the price.
http://www.ukpartsdirect.com/catalog...2/category/38/
Good little scanner for the price.
#9
Virgin
Thread Starter
Join Date: Jun 2010
Location: Emmen, The Netherlands
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys I realize you are trying to help but I asked if anyone could verify if a particular scanner was compatible with my car and you guys are suggesting other scanners.
And that one Mattie is a code reader not a diagnostic scanner. A code reader will read and reset fault codes a diagnostic scanner will actually read the live data being sent by the sensors so you get a more accurate picture of what your engine is doing.
And that one Mattie is a code reader not a diagnostic scanner. A code reader will read and reset fault codes a diagnostic scanner will actually read the live data being sent by the sensors so you get a more accurate picture of what your engine is doing.
#10
Wahay!! I've lost my Virginity!!
Join Date: Jan 2012
Location: Grimsby
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
ELM327 will work on a KA. Half decent ELM software that will give you Powertrain, airbag and ABS diagnostics and live data is made by Palmer. Have a google for Palmer Scan XL.
For Bi-directional control I use an Autoenginuity setup with enhanced Ford Licence. This gives you loads more control and actuation of ECU controlled parts as well. I have access to.
Powertrain
ABS
Airbag
PATS (timed access Key coding)
Central Timer module/ GEM
Dash clocks
For Bi-directional control I use an Autoenginuity setup with enhanced Ford Licence. This gives you loads more control and actuation of ECU controlled parts as well. I have access to.
Powertrain
ABS
Airbag
PATS (timed access Key coding)
Central Timer module/ GEM
Dash clocks
Last edited by bobster1982; 06-04-2012 at 10:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
borboyous
Cars for Sale
6
22-08-2015 11:17 AM
salsheikh
Alloy wheels and ICE for sale
0
30-07-2015 08:45 PM