focus st170 engine swap
#1
Virgin
Thread Starter
Join Date: Nov 2011
Location: ayrshire
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://passionford.com/forum/images/icons/icon1.gif)
hi all,
i have a 02 st 170 write off and a 2000 focus 1.8 black top zetec,what i would like to know is can i simply swap engine/box/shafts etc, ecu clocks straight over retaining the 1.8 wiring harness ,or will i need the st wiring loom too?
and if i do need to swap wiring does the engine loom seperate or is it a all in 1 job?
any advice from anyone who has carried out this conversion or generally knows their way around a focus would be much appreciated
thanx
i have a 02 st 170 write off and a 2000 focus 1.8 black top zetec,what i would like to know is can i simply swap engine/box/shafts etc, ecu clocks straight over retaining the 1.8 wiring harness ,or will i need the st wiring loom too?
and if i do need to swap wiring does the engine loom seperate or is it a all in 1 job?
any advice from anyone who has carried out this conversion or generally knows their way around a focus would be much appreciated
thanx
#2
I'm Finding My Feet Here Now
![Default](https://passionford.com/forum/images/icons/icon1.gif)
You'll need to swap everything from the written shell to the good shell....loom and fuel system. That's because like many people will tell you...the ST170 doesn't have a normal fuel return pipe, because it's controlled by the ECU.
I'm afraid your job is a lot worst than you would thought before
I'm afraid your job is a lot worst than you would thought before
![Wink](https://passionford.com/forum/images/smilies/icon_wink.gif)
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
04-01-2024 02:36 PM
Palethorpe01
General Car Related Discussion.
15
18-08-2015 06:09 AM