does anyone no the dimensions of the throttlebody the square bit where the mounting bolts go to

 

ill dig my old one out tomoz and have a look

 

thanks mate.where in manchester are you mate

 

In partinton mate. i got my old tb ere but the base isnt an exsact sqaure length ways one side is roughly around 83mm and the other side is 79-80mm then width ways its 90mm. wot u doin to it? u prob be better off getting hold of one. like i say its not quiet squared shaped!

 

i was wondering if it fits in place of my 1600 body on my zetec se inlet.they do look very similar

 

it fits and is quite a nice mod according to a friend who did it (better response, quicker revving)... it does however requires some custom work - a custom "spacer" and some work with throttle line fix - nothing serious though

 

thanks for the info i will be on this over christmas

 

what are the sizes of the throttle body on the 1600 and the 2litre?

 

do you no what spacer was used for the mod

 

spacer was custom, but you can do it yourself...

 

did it sit between the inlet and throttle body

 

anymore info on this mate

 

didn't do it myself, all I know is it was quick & easy

 

was a spacer made to sit between the throttle body.i did try and just bolt it on i didnt put the throttle cable on and it just reved up to 3thousand revs dont no why.

 

PM this guy - https://passionford.com/forum/members/51720-ar3s.html - this is him I was talking about, had the same problem and they figured it out with our mechanic...

 

thanks ive just pmed him