Headlight Help??
#1
PF Village Idiot
Thread Starter
Join Date: Jan 2008
Location: Lincolnshite
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Headlight Help??
Hey folks.. I'm finally putting my headlights back to standard, but I had to get the headlight connections off another Focus. Same year, so assumed same colours, but they're not.
Help/Wiring diagrams would be great!
Help/Wiring diagrams would be great!
#4
PF Village Idiot
Thread Starter
Join Date: Jan 2008
Location: Lincolnshite
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
My Focus is a 2001, the looms I chopped out of the donor car were 2001.. But some are different colours. I'm basically going back to standard.
The loom from the car has been chopped, I have replacements (but different colour wires).. the drivers side light is fine.. Just passenger side I'm struggling with.
The loom from the car has been chopped, I have replacements (but different colour wires).. the drivers side light is fine.. Just passenger side I'm struggling with.
#6
PF Village Idiot
Thread Starter
Join Date: Jan 2008
Location: Lincolnshite
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Riiiight..
List of wires as follows:
From the car-
Black
Green with Orange stripe
Green with Black stripe
Orange with Blue stripe
Blue
The "New" (standard) connector-
Black
Blue with Red stripe
Green with White stripe
Orange with Green stripe
Green with Orange stripe
Now, I am a complete 'tard when it comes to electrics, but I've figured that the black goes to the black (earth?). The rest I have no frikkin idea!
List of wires as follows:
From the car-
Black
Green with Orange stripe
Green with Black stripe
Orange with Blue stripe
Blue
The "New" (standard) connector-
Black
Blue with Red stripe
Green with White stripe
Orange with Green stripe
Green with Orange stripe
Now, I am a complete 'tard when it comes to electrics, but I've figured that the black goes to the black (earth?). The rest I have no frikkin idea!
#7
15K+ Super Poster!!
iTrader: (2)
Is some thicker than others? the thinnest ones probably go to the adjustment motor, the other three would be earth (black), dipped and main beam. Shouldn't be too hard to have a swap around until you get it right. I would go out and have a play with a multimeter on mine, but its got factory xenons so the wiring is completely different!
You say one side matched up fine? Because the wire colours are different on each side.
You say one side matched up fine? Because the wire colours are different on each side.
Trending Topics
#9
Wahay!! I've lost my Virginity!!
Join Date: May 2009
Location: Barnstaple, North Devon
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
The only thing to do is use temporary connectors and test the lights and the different functions, you shouldn't cause any harm.
Just make sure you lost the order in what you test and the result you get.
Macca
Just make sure you lost the order in what you test and the result you get.
Macca
Thread
Thread Starter
Forum
Replies
Last Post
Steve Escos
Ford RS Turbo Parts for Sale
0
01-10-2015 06:57 AM