post your focus
hi rueboy how did you go about getting rid of your indicators and swop for a mesh type look.is there any other styles availiable.i want to get the head lamps with the indicators in the head lights not the bumper
dya go up hams hall or anything?just found another piccie of mine...filthy engine bay :

Hi John,
At the moment I have the following,
Magnex Cat Back Exhaust.
Piper 4-2-1 Exhaust Manifold & Decat.
Magnecor Leads.
Nology Plugs.
St170 Snorkel & Airbox.
K&N Panel Filter.
2.0l Automatic Air Deflector.
I doubt the plugs and leads make much difference but they look nice
.
I have a set of Crower Stage 2 Cams and uprated Valve Springs with CFM Pulleys on the way from Florida but I'm extremely tempted to hold out fitting them to my 1.8 and get a 2.0 engine and running gear and turn it into a bit of an NA Monster!
What have you got planned for yours
?
Ben.
At the moment I have the following,
Magnex Cat Back Exhaust.
Piper 4-2-1 Exhaust Manifold & Decat.
Magnecor Leads.
Nology Plugs.
St170 Snorkel & Airbox.
K&N Panel Filter.
2.0l Automatic Air Deflector.
I doubt the plugs and leads make much difference but they look nice
I have a set of Crower Stage 2 Cams and uprated Valve Springs with CFM Pulleys on the way from Florida but I'm extremely tempted to hold out fitting them to my 1.8 and get a 2.0 engine and running gear and turn it into a bit of an NA Monster!
What have you got planned for yours
Ben.
Hi John,
At the moment I have the following,
Magnex Cat Back Exhaust.
Piper 4-2-1 Exhaust Manifold & Decat.
Magnecor Leads.
Nology Plugs.
St170 Snorkel & Airbox.
K&N Panel Filter.
2.0l Automatic Air Deflector.
I doubt the plugs and leads make much difference but they look nice
.
I have a set of Crower Stage 2 Cams and uprated Valve Springs with CFM Pulleys on the way from Florida but I'm extremely tempted to hold out fitting them to my 1.8 and get a 2.0 engine and running gear and turn it into a bit of an NA Monster!
What have you got planned for yours
?
Ben.
At the moment I have the following,
Magnex Cat Back Exhaust.
Piper 4-2-1 Exhaust Manifold & Decat.
Magnecor Leads.
Nology Plugs.
St170 Snorkel & Airbox.
K&N Panel Filter.
2.0l Automatic Air Deflector.
I doubt the plugs and leads make much difference but they look nice
I have a set of Crower Stage 2 Cams and uprated Valve Springs with CFM Pulleys on the way from Florida but I'm extremely tempted to hold out fitting them to my 1.8 and get a 2.0 engine and running gear and turn it into a bit of an NA Monster!
What have you got planned for yours
Ben.
got a universal air fillter at the moment and a magnex back box but ive found she is suffering bad with heat soak so am looking at exhauset wrap
need here lowered to lol just cana aford it just now
john
p.s sorry to hijack the thred
The focus suffers terrible with heat soak!! Was a nightmare on my old focus. Best bet is a k%n panel filter that sits in the standard airbox
there are these lights http://cgi.ebay.co.uk/FORD-FOCUS-01-...3A3%7C294%3A30 not the same as mine but have built in indicators
here's mine a 1999 1.8 lx










mods so far
pioneer usb/ipod headunit
zetec interior
bmc cda
silicone intake tube
chrome battery and manifold cover
lowered 40mm
scorpion exhaust
angel eye projectors with 6000k hid conversion
led rear lights










mods so far
pioneer usb/ipod headunit
zetec interior
bmc cda
silicone intake tube
chrome battery and manifold cover
lowered 40mm
scorpion exhaust
angel eye projectors with 6000k hid conversion
led rear lights
Hi eveyone,
Just a couple of things, I have owned my RS Focus for a couple of years now. When i got the car it had 15k on the clock and it has today just brok the 22k mark on the Cornwall Moors Tour. I am a member of the Devon RSOC.
Since i have had it i have uprated a couple of things.
Here is a list:
Forge Actuator with uprated psi spring
Full Samco Silicone hose conversion
Milltek Cat-back Exhaust
Pumaspeed inspired K&N Induction Kit
Bluefin Re-map
Colourcoded Rocker Cover,
Various Stainless items.
Here is my Focus - Hope you guys like it!!! Let me know what you think!
P1000205.jpg?t=1245529143
P1000204.jpg?t=1245529077
P1000209.jpg?t=1245529183
Rockercover2.jpg?t=1245529290
Just a couple of things, I have owned my RS Focus for a couple of years now. When i got the car it had 15k on the clock and it has today just brok the 22k mark on the Cornwall Moors Tour. I am a member of the Devon RSOC.
Since i have had it i have uprated a couple of things.
Here is a list:
Forge Actuator with uprated psi spring
Full Samco Silicone hose conversion
Milltek Cat-back Exhaust
Pumaspeed inspired K&N Induction Kit
Bluefin Re-map
Colourcoded Rocker Cover,
Various Stainless items.
Here is my Focus - Hope you guys like it!!! Let me know what you think!
P1000205.jpg?t=1245529143
P1000204.jpg?t=1245529077
P1000209.jpg?t=1245529183
Rockercover2.jpg?t=1245529290





few new photos of mine,





im running the rs box and st170 hubs with diesel focus driveshafts, the st170 shafts dont fit the 6 speed box of the st170 they are to small!















































