Ford Focus heater control speed setting dial problem
23-09-2012, 04:59 PM
#1
Wahay!! I've lost my Virginity!!
Thread Starter
Join Date: Jan 2012
Location: Padiham
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Ford Focus heater control speed setting dial problem
Hi guys,
I've been having problems with my heater speed setting, where by it didn't work at all when selecting a speed. I've pulled the centre console off today and noticed the connection of one of the wires was a little loose. After re-seating the wire, the heating started to work but only on the number 1 speed setting. As far as I was aware that if it only worked on speed setting 4 it was the resister, but as I said mine only works on speed 1. Is it still likely to be the resister or the switch itself. Or even the plug the wires sit in that then plugs into the back of the dial???
Any suggestions are greatly recieved.
Mart
I've been having problems with my heater speed setting, where by it didn't work at all when selecting a speed. I've pulled the centre console off today and noticed the connection of one of the wires was a little loose. After re-seating the wire, the heating started to work but only on the number 1 speed setting. As far as I was aware that if it only worked on speed setting 4 it was the resister, but as I said mine only works on speed 1. Is it still likely to be the resister or the switch itself. Or even the plug the wires sit in that then plugs into the back of the dial???
Any suggestions are greatly recieved.
Mart
Thread
Thread Starter
Forum
Replies
Last Post
Zoggon
Ford Sierra/Sapphire/RS500 Cosworth
5
10-08-2015 10:39 AM
jimmy oldskool
Ford Focus (All Models)
2
04-08-2015 06:54 PM
