s2 stud conversion
Thread Starter
Joined: Aug 2009
Posts: 586
Likes: 0
From: Croydon
s2 stud conversion
Hello guys and girls I'm in the middle of doing conversion . From bolts to studs for my wheels on my s2 has anybody else done this conversion
I've used permanent lock tight with m12 bolts
I've used permanent lock tight with m12 bolts
Last edited by Ryoishikawa; Jul 2, 2013 at 10:17 AM.
I'm half way through it. Got one side done.
I took my hubs to my local garage and borrowed their lathe to get the back of the hubs nice a flat. The rear hubs have a bit of a slope on the back meaning the bolts would come through slightly wonky. However, this is me mostly being a perfectionist.
1/2" drill bit to drill out the threads. Then pressed them in.
I took my hubs to my local garage and borrowed their lathe to get the back of the hubs nice a flat. The rear hubs have a bit of a slope on the back meaning the bolts would come through slightly wonky. However, this is me mostly being a perfectionist.
1/2" drill bit to drill out the threads. Then pressed them in.
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
Oct 17, 2021 10:09 AM
SMILER258
Restorations, Rebuilds & Projects.
36
Sep 28, 2015 09:04 AM