I have bought some 300mm discs and mk3 mondeo calipers for my S1 project, looking at fitting them it looks like I need 20mm spacers between the calipers and the hubs ? Is this correct ? Or am i missing something ?
Also tryed fitting my 16 inch RS7's with the 300mm discs and calipers it it looks like they are going to catch. any ideas ?
Cheers

 

yeap you need spacers. I've bought them from ebay for mine. 12GBP inluding bolts etc..

 

i thought theyd fit easy tbh mate (under the wheel i mean)

maybe trim a bit off the caliper!?

have seen people running 15's with this set up though

 

Thanks for responses.
Tasos I have just looked through 28 pages of rst parts on ebay, no spacers, but i found the rear panel plugs i have been looking for ages !
Tasos who sold them to you ?
Looks like I need to get some pictures up, its about time i got it sorted !

 

did you get the discs of the st170

 

If you use st170 discs, and the mondeo caliper, it should be a 12mm spacer from memory.

 

discs and calipers bought from percybigun off here, ad in the st parts for sale.

 

rs milesy i can't remember the seller! I'm trying but nothing.... He will appear in ebay for sure! He was there a week ago!