Top Series 2's
20-12-2008, 09:24 AM
#44
Spanner monkey
Only just seen this post,
Christ Radders, how'd you remember my old series 2? i sold it about 6 years ago lol!
I've still got the mag in my toolbox ar work when it was featured but unfortunatly didn't have a digi camera back then, only got a couple of pics on the pc.
It wore the first GRS cooler and was modelled on a volvo item, just reduced 4" in height
As you said, 1.9cvh, weber management, 803's, single pass GRS, 4x4 T3 with .63 housing, mongoose etc. cossie 4 pots on the front, focus rear conversion, re trimmed interior. Full respray in black, with red pearl and course flake.
The twins have seen it a few times since and was looking a bit sorry for itself!!
Christ Radders, how'd you remember my old series 2? i sold it about 6 years ago lol!
I've still got the mag in my toolbox ar work when it was featured but unfortunatly didn't have a digi camera back then, only got a couple of pics on the pc.
It wore the first GRS cooler and was modelled on a volvo item, just reduced 4" in height
As you said, 1.9cvh, weber management, 803's, single pass GRS, 4x4 T3 with .63 housing, mongoose etc. cossie 4 pots on the front, focus rear conversion, re trimmed interior. Full respray in black, with red pearl and course flake.
The twins have seen it a few times since and was looking a bit sorry for itself!!
20-12-2008, 05:51 PM
#47
Only just seen this post,
Christ Radders, how'd you remember my old series 2? i sold it about 6 years ago lol!
I've still got the mag in my toolbox ar work when it was featured but unfortunatly didn't have a digi camera back then, only got a couple of pics on the pc.
It wore the first GRS cooler and was modelled on a volvo item, just reduced 4" in height
As you said, 1.9cvh, weber management, 803's, single pass GRS, 4x4 T3 with .63 housing, mongoose etc. cossie 4 pots on the front, focus rear conversion, re trimmed interior. Full respray in black, with red pearl and course flake.
The twins have seen it a few times since and was looking a bit sorry for itself!!
Christ Radders, how'd you remember my old series 2? i sold it about 6 years ago lol!
I've still got the mag in my toolbox ar work when it was featured but unfortunatly didn't have a digi camera back then, only got a couple of pics on the pc.
It wore the first GRS cooler and was modelled on a volvo item, just reduced 4" in height
As you said, 1.9cvh, weber management, 803's, single pass GRS, 4x4 T3 with .63 housing, mongoose etc. cossie 4 pots on the front, focus rear conversion, re trimmed interior. Full respray in black, with red pearl and course flake.
The twins have seen it a few times since and was looking a bit sorry for itself!!
20-12-2008, 07:32 PM
#49
Too many posts.. I need a life!!
Join Date: Nov 2008
Location: Oxford
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Here is my new baby, i know it dont compete with the likes of Christians and Twins but im happy with it and one of the cleanest I have owned! 
Last edited by blueskies85; 20-12-2008 at 07:35 PM.
20-12-2008, 07:44 PM
#51
Too many posts.. I need a life!!
Join Date: Nov 2008
Location: Oxford
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
20-12-2008, 08:14 PM
#52
I do like the diamond cut alloys.
IMO, '90 Spec spoiler would really make that look sweet.
By the way, regarding mine, it's been a long-term build that started with me buying a really really bloody clean low mileage RST 10 years ago. I knew very little mechanically back then.
IMO, '90 Spec spoiler would really make that look sweet.
By the way, regarding mine, it's been a long-term build that started with me buying a really really bloody clean low mileage RST 10 years ago. I knew very little mechanically back then.
20-12-2008, 08:26 PM
#53
Too many posts.. I need a life!!
Join Date: Nov 2008
Location: Oxford
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
well i feel very complemented... thanks Christian! I am looking for a 90 spec rear spoiler and was thinking of front bumper too but ill just keep the 88 spec on there for the time being... The exhaust is the only boyed up thing on it 4 inch rolled tip but it doesnt look too bad, The bonnet lifters have even grown on me as i never thought they would!
20-12-2008, 09:11 PM
#54
I do like the diamond cut alloys.
IMO, '90 Spec spoiler would really make that look sweet.
By the way, regarding mine, it's been a long-term build that started with me buying a really really bloody clean low mileage RST 10 years ago. I knew very little mechanically back then.
IMO, '90 Spec spoiler would really make that look sweet.
By the way, regarding mine, it's been a long-term build that started with me buying a really really bloody clean low mileage RST 10 years ago. I knew very little mechanically back then.
How is your monster?
20-12-2008, 09:20 PM
#56
well i feel very complemented... thanks Christian! I am looking for a 90 spec rear spoiler and was thinking of front bumper too but ill just keep the 88 spec on there for the time being... The exhaust is the only boyed up thing on it 4 inch rolled tip but it doesnt look too bad, The bonnet lifters have even grown on me as i never thought they would!
The RST carries a 4" tailpipe really well IMO.
Mine wore standard wheels for as long as I could before having to upgrade wheel size to go with big brakes.
20-12-2008, 09:28 PM
#59
Fast Ford snapper
Fastest car I've ever been in..... the Sitech Racing RST....
20-12-2008, 09:32 PM
#60
Too many posts.. I need a life!!
Join Date: Nov 2008
Location: Oxford
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
My has '90 spec rear spoiler and pre '90 spec front bumper. I have a brand spanking new '90 spec bumper sitting at work that I am contemplating whether or not to fit!!
The RST carries a 4" tailpipe really well IMO.
Mine wore standard wheels for as long as I could before having to upgrade wheel size to go with big brakes.
The RST carries a 4" tailpipe really well IMO.
Mine wore standard wheels for as long as I could before having to upgrade wheel size to go with big brakes.
I really like the 90 spec spoilers and am even contemplating getting a little black lip painted on the back, it joins the black door handles and piping on the front and rear bumpers.
Yes four inch tailpipes look awesome, i had a straight one on a diff s2 and this one has got a rolled tip on, looks really smart me thinks.
Those brakes on yours look absolutely massive, must stop very very well lol!
21-12-2008, 10:31 AM
#65
powered by K26
Join Date: May 2004
Location: europark. sitech racing
Posts: 1,031
Likes: 0
Received 0 Likes
on
0 Posts
:
29-12-2008, 10:51 AM
#79
Too many posts.. I need a life!!
Join Date: Nov 2008
Location: Oxford
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
for looks i vote bassboys, for a culmination of simplicity (looks wise) and original cvh power id vote Christians every day of the week, i reckon Twins is up there with Bassboys for looks too.... infact its a joint 1st lol
29-12-2008, 11:33 AM
#80
