16" compomotive mo's
01-02-2007, 08:10 PM
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Jul 2006
Location: Norfolk
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
16" compomotive mo's
After much thought about what wheels to get for my project i have had a change of thought and settled on the idea of a set of 16" compomotive mo's but im unsure what size wheels and tires i will require?. First off im running a full koni setup and have done a cossy rear disk conversion. I have been looking around but cant realy find what sizes i need so i have no rubbing or clearance issues. Can anyone put me on the right track? As far as i can find out i should be looking for somthing around
7Jx 16" alloys with an offset of 35mm with 205 40R 16 rubber. I could be totaly wrong so pease could someone in the know help me out
7Jx 16" alloys with an offset of 35mm with 205 40R 16 rubber. I could be totaly wrong so pease could someone in the know help me out
02-02-2007, 07:01 AM
#3
I've found that life I needed.. It's HERE!!
iTrader: (2)
Join Date: Sep 2005
Location: East Yorkshire
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
I ran 7.5x16 ET35 with 205/45/16
Rear disc conversion and Eibach springs with a 25mm drop.
The rears would rub on the top of the back bumper where it wraps round into the arch, but only on really severe compressions or when fully loaded.
Rear disc conversion and Eibach springs with a 25mm drop.
The rears would rub on the top of the back bumper where it wraps round into the arch, but only on really severe compressions or when fully loaded.
Thread
Thread Starter
Forum
Replies
Last Post