MK5 LOCK SET
Does anyone know if a escort mk5 lock set will fit a mk4? If not a straight swap does anyone know if they could be made to fit using the old mk4 lock set?
Got my new lock set the other day and iv started doing the little mods requied to get the front to fit properly.

As you can see from the pics iv started shaping the end of one of the arms. Iv mesured everything up and apart fom drilling the hole i should only need to make a small spacer up for the inside of the door to hold the lock firmly in place. I havnt yet checked to see if the rear boot and ignition lock is diffrent but im hoping they are the same. Ill do an update on how it goes for future use

As you can see from the pics iv started shaping the end of one of the arms. Iv mesured everything up and apart fom drilling the hole i should only need to make a small spacer up for the inside of the door to hold the lock firmly in place. I havnt yet checked to see if the rear boot and ignition lock is diffrent but im hoping they are the same. Ill do an update on how it goes for future use
The only reason i went for a mk5 lockset is that i got it real cheap. Im not even shure if you can still buy a new mk4 lock set as iv never seen any for sale.
The front door locks should be stronger though as im replacing the plastic arms for metal ones.
The front door locks should be stronger though as im replacing the plastic arms for metal ones.
Trending Topics
Well i can say for definate that you can cange the core of the mk5 rear boot lock into the mk4 lock. See pics below how i did it
The core removed from the old lock by removing two c clips from the rear

The new core beside the old lock. Had to pry the front cover off the mk5 lock to get at the core

Putting the first c clip back into place

Spring, lever and last c clip laid out ready to put back together

All done
The core removed from the old lock by removing two c clips from the rear

The new core beside the old lock. Had to pry the front cover off the mk5 lock to get at the core

Putting the first c clip back into place

Spring, lever and last c clip laid out ready to put back together

All done
Thread
Thread Starter
Forum
Replies
Last Post
Steve Escos
Ford Focus ST Parts for Sale
6
Sep 2, 2019 11:39 PM



not pull it apart and change all the inside's over

