Carbon dash - Help!
16-12-2005, 05:28 PM
#1
Too many posts.. I need a life!!
Thread Starter
Join Date: Apr 2005
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
Carbon dash - Help!
I have just bought a four piece carbon dash set from Motordrive (http://www.motordrive.com/acatalog/c..._Interior.html) but apart from the back panel for instument cluster I cant work out with the rest of the pieces go 
I have tried lining them up to various pieces in the dash but none of them seem to fit. Do they have to be cut out etc? And havent got a danny larhue what the big piece is (top centre of picture). Any help would be greatly appreciated 
I have tried lining them up to various pieces in the dash but none of them seem to fit. Do they have to be cut out etc? And havent got a danny larhue what the big piece is (top centre of picture). Any help would be greatly appreciated
16-12-2005, 05:54 PM
#2
these are for rally cars,big piece replaces centre console/gear lever surround,[fits nearly vertically in front of gear lever]long piece replaces part above glovebox[where airbag is on some models] and the other is for the heater dials etc,hope your not trying to fit them to a road car?
17-12-2005, 01:29 AM
#3
Too many posts.. I need a life!!
Thread Starter
Join Date: Apr 2005
Posts: 785
Likes: 0
Received 0 Likes
on
0 Posts
I am actually 
In all honesty I only really wanted the back panel for instument cluster as I have an electronic dash and wanted to spruce it up a little. Looks ike the other parts will go to waste noe then
In all honesty I only really wanted the back panel for instument cluster as I have an electronic dash and wanted to spruce it up a little. Looks ike the other parts will go to waste noe then
Thread
Thread Starter
Forum
Replies
Last Post
