Where can i buy genuine cosworth body panels?

Manly need the rear arch's but need info on where i can get all panels.

new or 2nd hand i already know about rs coswroth breakers btw

thanks matty

 

Last I saw a rear quarter go for was £800 a side. Very very rare these days.

So we're all pretty much fucked if someone hits our rear quarters.

 

rear quarter 500 from atm

 

that will be plus vat and some horrible postage charge i bet

 

plus vat but they wont post in incase of damage in transit a know as a was going to buy one from them

 

Just as well if they posted one out, you'd recieve a Transit wing

" No it's not a Transit wing it's a new genuine 909 Escos quarter"

 

thanks guys managaed to stumble accross atm last night.

Its a shame ford dont realise there are still 100's of old school ford enthusiasts with cosworths/xr's/capri's etc etc and they dont have a service to sort replacment pannels out for them.

Even if they only make a batch of 100 and dont make anymore to there all sold or something like that.

Im sure most people would perfer to pay 1k for a ecos panel than give there car up on insurance and get a equivlent car what isnt a ecos after your car has been smashed up.

Matty

 

I work at a press shop making car pannels and structural parts...although my job isnt to do with this (weld process engineer)

Basically to justify a run of a part you need to produce at least a few thousand....thats minimum really...

As the presstool needs to be maintained, sharp and in good order (can cost a fair ammount of money and time if its been left standing for 15yrs) then it has to be sep up on a press (or various presses if its done in more than one hit), materials, operators overheads etc....

Basically I think that ford might have done a few thousand many moons ago now theyre all dispersed and gone...the rally boys must have used a fair few in their day.

So tbh thats why.......A better way of doing it would have been to release so many pannels each year or so to keep the breed alive....

Dan

 

get a good panel beater to beat one out from sheet metal

 

I bought one today, just in case the worst happens really, plus theres a little bubble of rust near the petrol cap.

£681 including vat

 

is that through the rsoc?

 

Most outer panels are available from Ford normally.

 

I got it through atm, its brand new and has all the ford genuine part numbers etc

 

ordering a tailgate for my escort from atm this week also

 

Is this the case? Can you still buy ie front wings from fords?

 

CHRISNISS when I last checked couple of months ago there were still stocks of rear quater panels and front wings. No bumpers though

 

Ok cheers i may take a wonder down there tomorrow and see if they can get some front wings in for me.

 

problem mostly is that the ford computers show the stock as present but when you try to order the part in question its untracable that happend me a few times i bought mine off ebay from Engels renntechnik (from the imitation rondells wheels)

 

cosworth3d I checked @ Ford Daventry central werehouse

 

Did they have the front wings?

 

I think so

 

What does a new tailgate cost ?

Mine has a small ding and a small patch of rust begining at the bottom

Mark

 

If that's true what you say there Jakub, then I'm ordering one tomorrow from Ford if the price is good enough.

Highly doubt it thoug.
Anyone got the FINIS code for the rear quarter panel both side of a 92 Esc Cos?

 

Quater panels have been numerous in stock - that I am sure (I'bve checked small turbo though with fuel flap). They are very expensive as well.

 

I tried to get a tailgate today

No longer available according to my local dealer and they said they checked daventry.

They also tried "IDEX" ??? it's meant to find Ford parts anywhere in the world and they said a garage in Czechoslovakia had one

Bugger

Mark

 

The tailgates went to the Ford Clearance Centre ages ago - when the RSOC bought some parts from them a while back there were loads of Cossy tailgates lined up apparently. I was told they were earmarked for crushing because noone wanted to buy them

I also checked the front wing situation about a fortnight ago. Passenger wings are still available for £300 ish, but the drivers ones are NLA.

Apparently Ford will keep things in Daventry as long as they continue to sell. If, however they have a large stock of something and only sell a handful a year (like Cossy tailgates). They'll get rid of the stock to free up the space for something else.

 

I know a english guy in Poland with a garage full of Cosworth bits as i saw one of you was from Poland.

 

I took the day off work and drove down to ATM this morning
Picked up a brand new tailgate for £150, they have two left if anyone has the need for one.
The place is a bit of an Aladins Cave for Cosworth parts, they had a bloody great van full of brand new big turbo rear quarters

Mark

 

Any idea how much for the rear quarters?

 

Prices here

http://www.atmsport.com/spares_ford.php?category=18

I think they are out of date and have gone up a bit
They claim to have bought the last of the panels direct from Ford in germany, how true this is I do not know ?

Mark

 

Funny, "only" £411,35 on their website while they were trying to sell a set a few weeks back on Ebay for £1000
Might have to visit them to see what it's really all about.

 

I went to atm the other week, they said they had 3 left. I'm talking about the rear quarter panels. Including vat it cost me £681