flamer kit not doing it thang
Thread Starter
PassionFord Post Whore!!
Joined: May 2004
Posts: 5,040
Likes: 11
From: SLOUGH INIT BRUV!!?
hi all, got the flamer kit where it has two earth connections its working as i can hear it make a very low wining noise, i cleaned the spark plug and gave it a go,no luck..
i switchd it on and touchd it and got a shock
put it back in the exhaust and still no luck, i have used one earth conection out of the two
i switchd it on and touchd it and got a shock
put it back in the exhaust and still no luck, i have used one earth conection out of the two
What car is it on?
You should be able to look up the exhaust and see the spark plug sparking and hear it buzzing. These seem to work best once the car and the zorts have been allowed to warm up.
You should be able to look up the exhaust and see the spark plug sparking and hear it buzzing. These seem to work best once the car and the zorts have been allowed to warm up.
Originally Posted by Wes RS
switchd it on and touchd it and got a shock
Done that once, its surprising how much it fookin hurts lol
Thread Starter
PassionFord Post Whore!!
Joined: May 2004
Posts: 5,040
Likes: 11
From: SLOUGH INIT BRUV!!?
yeah its a scc one apparently, but i never saw the plug sparking, its humming etc but no spark, the spak plug WAS very dirty and i cleand it up
its going on a sierra rs cosworth
its going on a sierra rs cosworth
Trending Topics
CUNT!
Joined: Jun 2005
Posts: 720
Likes: 0
From: BLUE PILL or RED PILL ... All I offer is the truth, nothing more, nothing less. You choose.
Your exhaust probably isn`t earthed properly, you touching the electrode of the spark plug is what earthed it when it was out of the exhaust.
Originally Posted by CharlieSaff
What size is the plug gap ?
Mate told me when i had the same problem to make the gap bigger
Now the gap is 2.9 m and it sparks and flames lol
Mate told me when i had the same problem to make the gap bigger
Now the gap is 2.9 m and it sparks and flames lol







