Restorations, Rebuilds & Projects. Restoring her to Concourse? Just getting her running again? Or got a mad project? This is your room.

RUSTY my MK2 orion

Thread Tools
 
Search this Thread
 
Old Apr 25, 2014 | 08:04 PM
  #1  
daveyjay's Avatar
daveyjay
Thread Starter
Virgin
 
Joined: Apr 2014
Posts: 8
Likes: 0
From: nuneaton
Default RUSTY my MK2 orion

hello everyone I am new here and I thought I would show you all my mk2 orion that I call rusty, its a bit of a project as its been sat on a friends drive for about nine years,

so far on the car I have pretty much stripped the front end ready for a lot of welding

here is some pictures of rusty so far

these two are the day I got it back to my lock up
Name:  10173673_10203495566252242_2760013784403233292_n.jpg
Views: 46
Size:  13.8 KB

Name:  10006320_10203495567092263_6738395047593935671_n.jpg
Views: 48
Size:  13.4 KB

and these are from arguing with rusty bolts for two days
Name:  P1000531.jpg
Views: 37
Size:  14.3 KB

Name:  P1000533.jpg
Views: 33
Size:  14.8 KB

and just abit of the rust I need to fix
Name:  P1000534.jpg
Views: 33
Size:  11.3 KB

tomorrow I will spend abit of time sorting bits out sorting out my lock up and putting together a list of parts I need to find for it

enjoy
Reply
Old Apr 26, 2014 | 12:41 AM
  #2  
kieranfarr's Avatar
kieranfarr
15000
 
Joined: Jan 2013
Posts: 27
Likes: 0
From: bradford
Default

look forward to watching this love the shape of the orion looks like this one is in need of a helping hand though, keep us updated
Reply
Old Apr 26, 2014 | 07:09 AM
  #3  
GINGExR2 T's Avatar
GINGExR2 T
Advanced PassionFord User
iTrader: (1)
 
Joined: May 2003
Posts: 1,702
Likes: 13
From: South Wales
Default

.

Nice to see another one being saved .

Bit of advice for you, if you plan on replacing the front panel and the slam panel on the car is ok just change the headlight sections, I've done 3 front ends on different cars over the last few years and the copy front slam panels are utter rubbish, the lower sections come off nice and easy.


Ginger


.
Reply
Old Apr 26, 2014 | 07:11 AM
  #4  
slammedorion's Avatar
slammedorion
PassionFord Post Whore!!
 
Joined: Nov 2004
Posts: 4,773
Likes: 237
From: Cheshire
Default

Good luck... Keep the updates coming...
Reply
Old Apr 26, 2014 | 09:07 AM
  #5  
daveyjay's Avatar
daveyjay
Thread Starter
Virgin
 
Joined: Apr 2014
Posts: 8
Likes: 0
From: nuneaton
Default

Originally Posted by GINGExR2 T
.

Nice to see another one being saved .

Bit of advice for you, if you plan on replacing the front panel and the slam panel on the car is ok just change the headlight sections, I've done 3 front ends on different cars over the last few years and the copy front slam panels are utter rubbish, the lower sections come off nice and easy.


Ginger


.

Any good web sites to get panels?
Reply
Old Apr 26, 2014 | 04:50 PM
  #6  
daveyjay's Avatar
daveyjay
Thread Starter
Virgin
 
Joined: Apr 2014
Posts: 8
Likes: 0
From: nuneaton
Default

well been busy this afternoon stripping the rest of the car to find all the rust, refitting the front suspension and removing the wiring loom

passenger side
Name:  P1000535.jpg
Views: 49
Size:  11.2 KB
Name:  P1000537.jpg
Views: 47
Size:  10.1 KB
Name:  P1000536.jpg
Views: 40
Size:  11.1 KB

drivers side
Name:  P1000538.jpg
Views: 46
Size:  10.8 KB
Name:  P1000539.jpg
Views: 37
Size:  9.4 KB

and I had to put the new alloys on as the tires were shot and I need to be able to move it about
Name:  P1000540.jpg
Views: 47
Size:  11.9 KB

a better picture of the front chassis
Name:  P1000541.jpg
Views: 32
Size:  13.8 KB

removed the rear lights
Name:  P1000542.jpg
Views: 39
Size:  8.8 KB

got bored so decided to put my new bonnet on just before it started raining
Name:  P1000543.jpg
Views: 36
Size:  12.9 KB
Reply
Old Oct 3, 2014 | 04:08 PM
  #7  
daveyjay's Avatar
daveyjay
Thread Starter
Virgin
 
Joined: Apr 2014
Posts: 8
Likes: 0
From: nuneaton
Default

so its been a very long time since I have updated this

so here we go since I last posted rusty joined the rest of the Orions in ford heaven because I jacked it up and it almost folded in half,
I have since acquired a new one an Ereg this time in much better condition but the day it got delivered it looked a total mess and I almost gave up completely.

so I started to get her sorted cleared out all the scrap that was left in the car and it was not as bad as it looked unfortunately I have no photos of it when I got it home
I did have to replace all 4 shocks and springs and all 4 doors, bonnet and boot were also changed I was very glad I kept all the parts from the old car

so here is 2 pics of how she sits today

Name:  10723085_10204756039678958_809520051_n_zps0a9129b6.jpg
Views: 50
Size:  128.1 KB

Name:  10708301_10204756040158970_283410579_n_zps8c0509ad.jpg
Views: 47
Size:  122.4 KB

I know some people don't like modified cars but I think this is just stunning
Reply
Old Oct 3, 2014 | 06:24 PM
  #8  
Shaun's's Avatar
Shaun's
PassionFord Regular
 
Joined: Jul 2014
Posts: 494
Likes: 42
From: Cumbria
Default

Like the arches but not so much the bumpers.....love an onion thouhg
Reply
Old Oct 3, 2014 | 06:36 PM
  #9  
daveyjay's Avatar
daveyjay
Thread Starter
Virgin
 
Joined: Apr 2014
Posts: 8
Likes: 0
From: nuneaton
Default

im not to sure on the rear bumper it just looks like a wart on the back
Reply
Old Oct 4, 2014 | 10:51 AM
  #10  
Glenn_'s Avatar
Glenn_
Glennvestite
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Jul 2006
Posts: 62,772
Likes: 1,050
From: Darlington county durham
Default

Its a shame the first orion was rotton. With a bit of tlc the black one might look ok when its finished.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
5
Nov 13, 2018 11:48 AM
89barto89
Garage / Workshop & Tools Section.
6
Oct 4, 2015 06:59 PM
Kiran1600E
Pictures, video & Photoshop Forum
11
Oct 2, 2015 11:35 AM
Sp3no
Technical help Q & A
1
Sep 27, 2015 07:23 PM




All times are GMT. The time now is 01:36 PM.