Zetec Turbo Tube Torque Tubular Manifold & T34 (20 miles old) External Wastegate
Thread Starter
Joined: Oct 2004
Posts: 13,368
Likes: 84
From: Preston, Lancs
For sale.
Here we have a Tubular manifold to accept a 16v Zetec head. Could be modified to fit a CVH head. Just requires different flanges on head to manifold side.
External wastegate take of welded on, comes with screamer pipe and wastegate.
There are braces on the manifold to support it. These pick up on bell housing bolts.
The T34 is on a T3 flange. Is a Lancia Integersle turbo. T3 front flange, cosworth 48 exhaust housing with penny welded shut as had always had the external wastegate.
The turbo has only covered 20 mile maximum since it was fully rebuilt with a new seal kit and new bearings. Including new shaft and both wheels.
Price. Looking at £725 plus £15 post for job lot.
This will bolt straight onto any zetec engine and hold the turbo over top of the gearbox.
Pics



Here we have a Tubular manifold to accept a 16v Zetec head. Could be modified to fit a CVH head. Just requires different flanges on head to manifold side.
External wastegate take of welded on, comes with screamer pipe and wastegate.
There are braces on the manifold to support it. These pick up on bell housing bolts.
The T34 is on a T3 flange. Is a Lancia Integersle turbo. T3 front flange, cosworth 48 exhaust housing with penny welded shut as had always had the external wastegate.
The turbo has only covered 20 mile maximum since it was fully rebuilt with a new seal kit and new bearings. Including new shaft and both wheels.
Price. Looking at £725 plus £15 post for job lot.
This will bolt straight onto any zetec engine and hold the turbo over top of the gearbox.
Pics



Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jessie_rs
Ford RS Cosworth Parts for Sale
11
Jun 3, 2019 04:57 PM
Focosmitch
Ford RS Cosworth Parts for Sale
9
May 31, 2016 09:28 PM
Focosmitch
Ford RS Cosworth Parts for Sale
2
Aug 14, 2015 07:29 AM







