I have the sprial type and they dont work on these locking nuts,i need somebody who has a kit like this http://www.lockingwheelnutremover.co...exEnglish.html

Tryed to remove my transit sport wheels to clean them only to find the locking key splines are all sheared off

Ps theres no locking nut info in the van docs.

They are Mcgards locking nuts if thats any use.

 

No help today, but Ford dealers have master key sets.

 

Are you a member of the AA?

Give them a shout mate, the patrols do carry a special kit to get them off and it does include the mcgard type.

 

Thanks maybe i better join the AA,Cheers

 

locking nuts are nothing but trouble, do alloys still get stolen?

 

No idea, but at Ł1200 for a set of Sportvan alloys without tyres... i dont want to find out

 

i got mine from machine mart mate but u a need a vise to seperate the two once removed. they worked on my mcgaurds when mine snapped too

 

Some tyre places will get them off for you matey (and the wheels)

 

Mcgards are crap - are they the round ones with a sort of thread on the outside? Hammer a 21 or 22mm (can't remember the right size) extra deep socket over it and simply undo. Serious waste of money!!

 

They have a washer type end that spins hence why the reverse thread spiral type removers dont work,the wheel nuts are 21mm iirc

 

The Dynomec kit works 100% on the Mcgard type nuts, I've not failed to get one off yet using it.

 

Anyone know the price off dynomec kit?

 

Anyone know the price off dynomec kit?

 

I have just phoned dynomec and i can take my van down and its costs Ł10 + vat per wheel

The kit is Ł170 on ebay

 

Well i went to dynomec today and i bought the kit,got home then got the wheel nuts off nice and easy
Im going to offer alloy wheel nut removal in the yorkshire lancs area (im mobile anyway).

 

Just how good was it mate I thinking off getting one?

 

Dead easy, you just need to give it some welly with a hammer or it wont dig in enough,the owner had some nice scars from hitting his hand with a hammer

 

Hi,

My wife called the AA to remove a locking wheel nut on the side of the road and he beat one of these ' soopa doopa, state of the art, locking wheel nut removal sockets ' on to the offending nut. when it didn't work, he had to recover her car home. I called lockingwheelnutsremoved.com and they came and took the three remaining lock nuts, and the one with the 'tool' still stuck on it.
Those tools may have worked when locking nuts were in their infancy, but not on modern nuts, a total waste of money.

Jon.

 

Get some old sockets on them and fill the inners with weld that's how I got mine off with the spinning washers

 

None of that old crap works on overtightened modern locking nuts. www,lockingwheelnutsremoved were the only people to guarantee to get them off.

 

work for them by any chance

 

never had trouble with getting locking wheel nuts off, bolox to all this modern special tool etc, mcguards, 18mm socket big hammer job done

 

We have that kit at work al. Works really well. The bits are about a Tenner a piece though. Can normally get 2 sets off before you have to replace the bit.