Cars for Sale Register for a Gold Membership to sell your car here!

Massive spec 600+bhp focus rs full car, pics added post #20

Thread Tools
 
Search this Thread
 
Old Mar 12, 2012 | 06:04 PM
  #1  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default Massive spec 600+bhp focus rs full car, pics added post #20

If this doesnt sell then it doesnt sell
But this is an absoloute bargain, only seelling due to bigger family and not enough time,

Most people may know the car anyway,
It has massive spec engine
Fully forged cgi bottom end
£2k cylinder head
Custom ground cam shafts
Tublar exhaust manifold
Twin side exit exhaust
Dta s60 pro engine managment
Blouch billet gtx3582 r turbo (720bhp capable)
Custom 1 off inlet manifold
Aeromotive fuel reg
Bosch fuel pumps
In boot battery and fuel tank
Stack dash with intergrated wideband and knock link
Fm intercooler

Seriously too much to list,
The car currently has a silver boot lid and no front wings or bumper, but has a wrc kit to be fitted and painted,
The engine just needs refitting and a new boost map doing,
Off boost map is done and will fire up on current map fine,

This car has never been a bufty toy and has been used, The body has no dents or rust, new polly bushed rear end,
The car has done aprox 46k miles,

As i said at the begining this is a bargain price,
£9500 takes it away no offers,

I have over £25k in this car
Any more info if interested
Give me a ring (07858502587)
Car is currently at GR performance in rotherham,

Cheers
Richard

Last edited by Rollinz; Mar 13, 2012 at 03:07 PM.
Reply
Old Mar 12, 2012 | 07:01 PM
  #2  
rsmark86's Avatar
rsmark86
PassionFord Post Whore!!
iTrader: (3)
 
Joined: Nov 2008
Posts: 5,686
Likes: 4
From: Bracknell
Default

Need a loan!!!
Reply
Old Mar 12, 2012 | 07:49 PM
  #3  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

The engine will be back in tomorrow,
And will run,
As time goes on the car will progress to a more finished state,
But the price would increase,
The car fully finished will be £12k no offers
Reply
Old Mar 12, 2012 | 07:56 PM
  #4  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Originally Posted by rsmark86
Need a loan!!!
Get to bank mate,

Spoke to ian howel earlier and in his words "its too cheap"

Head £2k
Cgi forged block £1500
Ecu & loom £1200
Stack dash with wide band knock link etc etc £1400
Exhaust manifold £600
Blouch billet 35 r turbo £1k
Inlet manifold £750
Fmic and hard pipe £300
Oil cooler with stat and oil pres/temp take offs £150
Blitz boost controler with aux loom £350 (£500 new)
Aeromotive fuel reg £120
44'mm tial wategate £150

There just some of the things on the car and they would be second hand prices i would sell them for if i was breaking... But same thing goes, i dot have time to break it,

This car is an absolout bargain, will be gutted to see it go but family first
Reply
Old Mar 12, 2012 | 09:00 PM
  #5  
Mark 3D's Avatar
Mark 3D
Moderator
iTrader: (29)
 
Joined: Apr 2004
Posts: 10,241
Likes: 3
From: UK
Default

Come and swap it for my TME
Reply
Old Mar 12, 2012 | 09:03 PM
  #6  
jonfoc's Avatar
jonfoc
Advanced PassionFord User
 
Joined: May 2011
Posts: 2,419
Likes: 272
From: God knows!
Default

NOB! Get it built and drive it. Dont go Jap or I'm trapping your nob in your bonnet!
Reply
Old Mar 12, 2012 | 09:10 PM
  #7  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Originally Posted by markyd3
Come and swap it for my TME
Tempted... Pics? Specs?
Reply
Old Mar 12, 2012 | 09:21 PM
  #8  
nevsrevs's Avatar
nevsrevs
PassionFord Post Troll
 
Joined: Jan 2011
Posts: 2,735
Likes: 22
From: somerset
Default

wtf mate, thought you where joking?
Reply
Old Mar 12, 2012 | 09:27 PM
  #9  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Really rely havnt got time to put into it mate

4 kids
Work away and only home at weekends
Reply
Old Mar 12, 2012 | 10:14 PM
  #10  
creator's Avatar
creator
Advanced PassionFord User
 
Joined: Aug 2008
Posts: 2,300
Likes: 6
From: derbyshire
Default

Do you take monthly payment? Lol on a more serious note cant belive tour sellin up dude
Reply
Old Mar 12, 2012 | 10:27 PM
  #11  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Originally Posted by creator
Do you take monthly payment? Lol on a more serious note cant belive tour sellin up dude
Can do mate...

Deposit of £9499 and 1 payment of £1 ... Lol

I really dont want to mate and tbh if it doesnt sell then im not worried,
Just wish i had time for it,
Reply
Old Mar 12, 2012 | 10:27 PM
  #12  
Dicko&Vacant's Avatar
Dicko&Vacant
10K+ Poster!!
iTrader: (3)
 
Joined: Jun 2003
Posts: 10,956
Likes: 0
From: Hartlepool
Default

rich have you bottled it cause jon is gonna have more power then you lol
Reply
Old Mar 12, 2012 | 10:32 PM
  #13  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Lmao, his will be close, but this car could set some serious records if somone has the time to finish it
Reply
Old Mar 12, 2012 | 10:35 PM
  #14  
m_nettleship's Avatar
m_nettleship
PassionFord Post Troll
 
Joined: Jul 2003
Posts: 2,941
Likes: 0
From: In the car!
Default

nice moter lad
Reply
Old Mar 13, 2012 | 08:14 AM
  #15  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Cheers mate, somone must want a project that nearly finished for te show season
Reply
Old Mar 13, 2012 | 10:17 AM
  #16  
rsmark86's Avatar
rsmark86
PassionFord Post Whore!!
iTrader: (3)
 
Joined: Nov 2008
Posts: 5,686
Likes: 4
From: Bracknell
Default

Mate if I could sell my escort and find the rest of the money it would come home with me

Glwts someone is getting a bargain, also if you do break it my mate might have the management?
Reply
Old Mar 13, 2012 | 10:44 AM
  #17  
robp-tt's Avatar
robp-tt
ZETEC TURBO
iTrader: (1)
 
Joined: Oct 2005
Posts: 1,527
Likes: 3
From: southampton
Default

That's way to cheap,if you have the time brake it for parts and you should make near double that
Reply
Old Mar 13, 2012 | 12:37 PM
  #18  
gray_rs's Avatar
gray_rs
Part of the Furniture
 
Joined: Nov 2008
Posts: 173
Likes: 0
From: dundee
Default

Need pics?
Reply
Old Mar 13, 2012 | 01:51 PM
  #19  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Ill get all the pics together now and post them up
Reply
Old Mar 13, 2012 | 03:35 PM
  #20  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default















































New billet oil pump for 8500rpm


















Inlet gaskets and thermostatic plate











Reply
Old Mar 13, 2012 | 04:57 PM
  #21  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Honestly thought this would of sold by now,
Its priced to sell and not been greedy,
This engine/car will make over 600 to near 630 (maybe more)
Reply
Old Mar 13, 2012 | 05:09 PM
  #22  
dingla rs's Avatar
dingla rs
PassionFord Post Whore!!
15 Year Member
Liked
iTrader: (2)
 
Joined: Jun 2009
Posts: 8,308
Likes: 25
From: catterick/sunny yorkshire
Default

would probly sell with some dyno paper work shown mate for the bhp figures

Last edited by dingla rs; Mar 13, 2012 at 05:20 PM.
Reply
Old Mar 13, 2012 | 05:12 PM
  #23  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Havnt got any pics of it,
Only have an old print out at work with the 545.4 bhp @ 1.4 bar,
Since then its got £2.5 k worth of cylinder head and monster cams
Reply
Old Mar 13, 2012 | 05:58 PM
  #24  
coswurv's Avatar
coswurv
PassionFord Post Troll
15 Year Member
Liked
iTrader: (8)
 
Joined: Dec 2006
Posts: 3,478
Likes: 3
From: oxford
Default

The fact it hasnt sold is that yes all together and mapped its worth the money, but to buy a car in pieces with no front end for 10k isnt everyones idea of how to spend money, as i found this when my cossie started to smoke after thousands spent, underside resto gt30 etc etc and i couldnt sell it, as you said its probably worth completeing it and showing people its reliable and do some good mileage to put a potential buyers mind at rest, then you can get the full wack you where after.

Last edited by coswurv; Mar 13, 2012 at 06:01 PM.
Reply
Old Mar 13, 2012 | 06:00 PM
  #25  
nevsrevs's Avatar
nevsrevs
PassionFord Post Troll
 
Joined: Jan 2011
Posts: 2,735
Likes: 22
From: somerset
Default

this will be a bargin for someone, like you said could be a record breaking car, i bet it wont be around for long, same as i was looking forward to seeing the new dyno figuers
Reply
Old Mar 13, 2012 | 07:22 PM
  #26  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Originally Posted by coswurv
The fact it hasnt sold is that yes all together and mapped its worth the money, but to buy a car in pieces with no front end for 10k isnt everyones idea of how to spend money, as i found this when my cossie started to smoke after thousands spent, underside resto gt30 etc etc and i couldnt sell it, as you said its probably worth completeing it and showing people its reliable and do some good mileage to put a potential buyers mind at rest, then you can get the full wack you where after.
I hear what your saying mate, but the fact that the car Is a focus "RS" that can quite easily be put back to std,

The engine has ran and done quite a few miles,
It made 545.4 bhp and ran sweet as a nut, i only stripped it down for a new oil pump so i could raise the limiter from 7200 to 8500
And when we tried to go above 1.7 bar i got valve float, so whipped the head off and spent a hell of aload of money on double spring conversion, porting and polishing, and also changed the blower to a billet one,
The block assembly itself has proved itself,
No offence but these zetec/cgi engines arnt yourtypical cossie lump,
There a very reliable unit,
The head is an area six jobbie so rest assured there wont be any issues there
Reply
Old Mar 13, 2012 | 07:31 PM
  #27  
Fullflush's Avatar
Fullflush
Advanced PassionFord User
 
Joined: Jul 2011
Posts: 1,723
Likes: 93
From: Mars
Default

Your going to struggle to sell here.

Its a million miles away from being usable. Half the bodywork missing, no engine and I presume the new owner will have to get it mapped. The new kit looks god awful (IMO), so the new owner will have to spend a fair penny to put that right.

Finally it begs the question, why don't you put it back together? Either there is a hidden problem, or more likely it will cost a bomb.

Your power claims seem very fanciful. Would you sell on a proviso that if it doesn't make 640bhp the new owner can have some money back?

Good luck with the sale, but you really should make it complete to make that kind of money you want
Reply
Old Mar 13, 2012 | 07:46 PM
  #28  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

If i was to finish it i would want £12k

The engine is built and if i get chance to fit it next week i will get it mapped to prove a figure,
Not really exagerated figures when you have the best part of £15k in the engine alone
Reply
Old Mar 13, 2012 | 08:30 PM
  #29  
rsmark86's Avatar
rsmark86
PassionFord Post Whore!!
iTrader: (3)
 
Joined: Nov 2008
Posts: 5,686
Likes: 4
From: Bracknell
Default

My mk3 group4 arched escort and monthly instalments lol
Reply
Old Mar 13, 2012 | 08:37 PM
  #30  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Id do installments if i didnt need the money mate,
Reply
Old Mar 13, 2012 | 08:48 PM
  #31  
creator's Avatar
creator
Advanced PassionFord User
 
Joined: Aug 2008
Posts: 2,300
Likes: 6
From: derbyshire
Default

As i said above rich,cant belive your getting rid.if i was in a better position and could get the money together without having a loan id snap your hand off and would come get it tonorow.whoever buys it will be very very happy
Reply
Old Mar 13, 2012 | 09:14 PM
  #32  
CrOwSoN15's Avatar
CrOwSoN15
Ben
 
Joined: Aug 2010
Posts: 4,853
Likes: 55
From: Peterborough
Default

Possibly know someone interested in this, all depending on if things go to plan with his current cars. I'll keep you informed mate.
Reply
Old Mar 13, 2012 | 09:37 PM
  #33  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Originally Posted by CrOwSoN15
Possibly know someone interested in this, all depending on if things go to plan with his current cars. I'll keep you informed mate.
Ok mate let me know or get him to ring me,
07858502587

Engine is now fully built,
Reply
Old Mar 15, 2012 | 07:56 AM
  #34  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

Ok so engIne is now built,
Engine bay cleaned and a/c pipes removed,
Wiring tidy'd up and now ready for the engine to be re-fitted,

Price still £9500

Or i can get the engine fitted and fully mapped but the price would then be £10'500 firm,
The further it gets to completion the price will keep going up,
But weather this car goes as it is now or fully complete its still needs to go as i now dont have a garage at home for it either as due to expanding family we are converting garage to a play room,

This is seriously a bargain, and a genuine reason for the sale

Last edited by Rollinz; Mar 15, 2012 at 08:01 AM.
Reply
Old Mar 15, 2012 | 08:57 AM
  #35  
rstdave's Avatar
rstdave
PassionFord Post Troll
iTrader: (3)
 
Joined: Jan 2005
Posts: 2,568
Likes: 0
From: Bristol/Bath
Default

IMO mate, unless you break up into bits (then you will no doubt be left with lots) you will be far better off completing the car and getting it mapped as you say it's not going to take much to do this?
As much as i like frs's, there is a very niche market for a highly modified and different one like yours when for the same money you could buy a mint fully working 300 odd bhp one (i do realise what you must have spent on the engine etc by the way so not a dig), when complete and people see the power figures etc you might get the sort of money you're after
Reply
Old Mar 15, 2012 | 10:08 AM
  #36  
vaughant's Avatar
vaughant
PassionFord Post Whore!!
iTrader: (1)
 
Joined: Jun 2008
Posts: 6,807
Likes: 0
From: south wales, swansea
Default

The no brainer for me is buy this&steve b's shell,choose the best bits,break the rest and you've probably got one of the best Rs focii around for around £10 k as the spares alone will fetch you £3-4K minimum.

Be nice to have the cash to do it!!!!

Surprised Paul nyrs isnt over this?

Last edited by vaughant; Mar 15, 2012 at 10:10 AM. Reason: £3-4 did sound cheap!!!
Reply
Old Mar 15, 2012 | 10:11 AM
  #37  
qad's Avatar
qad
Too many posts.. I need a life!!
 
Joined: Jul 2011
Posts: 594
Likes: 0
From: london
Default

looks the nuts glwts
Reply
Old Mar 15, 2012 | 05:28 PM
  #38  
Rollinz's Avatar
Rollinz
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2009
Posts: 848
Likes: 0
From: barnsley
Default

If i was to break my car....*
Just an idea at the min!!! But could you put down your name next to what you would be interested in,*
Even if someone else puts there name on an item still put it down then at least i know it would definatly sell...*

Engine:
Conplete bottom end & head £3500

Head with cams £2000

Forged bottom end with 145mm rods and low comp cp pistons £1500

Oil cooler setup £250

Dta s60 engine managment with motorsport loom £1200

Exhaust manifold (t3flange) £600

external wastegate (44mm) £150

Exhaust system (turbo back) £450

Turbo (blouch billet gtx3582R) £1000

Inlet manifold with fuel rail and TB (£650)

Siemens 83lb injectors £180

Aeromotive fuel regulator £80

Battery relocation kit (incl batt) £70

Fuel swirl pot £40

Fuel tank for boot (11gal foam filled) £250

Bosch 044 pump £70
Bosch lift pump £50

Fmic with pipework £350

Radiator (orig) £20

Gearbox £500

Airfilter £80

Wrc kit £600

Stack dash with loom and sensors £850

Doors £40 each

Full interior £250

Blitz boost controler(id3) £300

Knock link with sensor £50

Wideband lc1 incl sensor £100

Stack dash, wideband, knock link all together in a carbon dash surround £1200

Rear beam without hubs £100

Front subframe and bottom arms £300

Front and rear hubs £150

Std wheels with tyres £200

Front and rear brakes £200

Dashboard £50

Rear bumper £150

All the glass £200

Bare body shell, 45k miles, 2003 registered (52 plate) with log book, no accidents or insuranxe claims, £1200


Think thats everything???

As i said this is to guage interest....
Reply
Old Mar 15, 2012 | 06:08 PM
  #39  
chris ST's Avatar
chris ST
I'm Finding My Feet Here Now
 
Joined: Feb 2011
Posts: 115
Likes: 0
From: matlock
Default

Fuel reg
Reply
Old Mar 15, 2012 | 07:02 PM
  #40  
nevsrevs's Avatar
nevsrevs
PassionFord Post Troll
 
Joined: Jan 2011
Posts: 2,735
Likes: 22
From: somerset
Default

wheels and poss afr set up
Reply



All times are GMT. The time now is 08:39 PM.