Standard (ERST S2) ride hight measurements needed, Please help :-)
Thread Starter
Advanced PassionFord User
iTrader: (1)
Joined: May 2003
Posts: 1,702
Likes: 13
From: South Wales
.
Could anyone with a Sapphire 2wd Cossie and an S2 ERST with standard size wheels and tyres please help me out with some rid hight measurements. I need the hight measurement from the floor to the bottom of the wheel arch for both cars, front and back.
If anyone could help me out i'd be very very grateful.
Cheers, Ginger
.
Could anyone with a Sapphire 2wd Cossie and an S2 ERST with standard size wheels and tyres please help me out with some rid hight measurements. I need the hight measurement from the floor to the bottom of the wheel arch for both cars, front and back.
If anyone could help me out i'd be very very grateful.
Cheers, Ginger
.
Last edited by GINGExR2 T; Nov 22, 2011 at 12:20 PM.
Thread Starter
Advanced PassionFord User
iTrader: (1)
Joined: May 2003
Posts: 1,702
Likes: 13
From: South Wales
Apologies for the delay but my shower leaked overnight and the kitchen ceiling is now on the floor 
Mine are 600mm from and 625mm rear. That's measured to the external roll of the arch before it tucks under. Springs are uprated by 25% but supposed to be standard ride height, it looks nice on the road and as you can see it's not dragging its arse on the ground.

Mine are 600mm from and 625mm rear. That's measured to the external roll of the arch before it tucks under. Springs are uprated by 25% but supposed to be standard ride height, it looks nice on the road and as you can see it's not dragging its arse on the ground.
Thread
Thread Starter
Forum
Replies
Last Post
rog
Cars for Sale
25
Sep 4, 2015 12:10 PM
sridgett
General Car Related Discussion.
15
Aug 3, 2015 07:26 PM







