1.8 ZVH engine
Thread Starter
.
Joined: Jun 2010
Posts: 2,727
Likes: 7
From: Hampshire
1.8 ZVH engine
1.8 ZVH engine with Low comp Wossner Pistons
Stage 3 Head
Comenic Head Gasket
New Piper 2t cam fitted.
Kent vernier wheel
Offers
Also have
MFI Lightened flywheel, modifed for Zetec bolts not sure how much
EFI Inlet missing the two sensors. £40
Efi adapter plate £40
Stage 3 Head
Comenic Head Gasket
New Piper 2t cam fitted.
Kent vernier wheel
Offers
Also have
MFI Lightened flywheel, modifed for Zetec bolts not sure how much
EFI Inlet missing the two sensors. £40
Efi adapter plate £40
Last edited by luke19790_3; Jul 14, 2011 at 06:24 PM.
Advanced PassionFord User
Joined: May 2003
Posts: 2,312
Likes: 0
From: FOREST OF DEAN GLOS
Hi
What additional parts would I need to put this engine in an Escort RS Turbo, and what sort of power could be achieved with the turbo?
How much for the complete package your offering?
Si
What additional parts would I need to put this engine in an Escort RS Turbo, and what sort of power could be achieved with the turbo?
How much for the complete package your offering?
Si
Thread Starter
.
Joined: Jun 2010
Posts: 2,727
Likes: 7
From: Hampshire
If you're running mfi then just swap everything over on to the new engine. inlets and exhaust. a cvh fly wheel is needed and the holes need to be drilled out, but any engineering company can do this for afew £
I do have efi inlet +adapter so you would need a loom and ecu from a fiesta. i am running megasquirt.
Not sure what spec the turbo is, but i think i will keep it for the zetec engine.
I do have efi inlet +adapter so you would need a loom and ecu from a fiesta. i am running megasquirt.
Not sure what spec the turbo is, but i think i will keep it for the zetec engine.
Last edited by luke19790_3; Jul 8, 2011 at 06:24 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
blackbeautyzetec
Ford Escort RS Turbo
10
Sep 11, 2015 03:10 PM
