Modified Silver top 2.0 zetec head, cams, verniers and throttles!!
Thread Starter
Too many posts.. I need a life!!
iTrader: (1)
Joined: Aug 2004
Posts: 744
Likes: 0
From: Ford Country
As above, I have a lovely modded head from Charlie at CTM performance. It is all stamped for authentication. It has had a very nice port and polish job, a gentle skim, 3 angle seats and has been fitted with new stem seals. Std springs were deemed ok for up to the 7 k limit of my cams. It did not even do 5k in my car, and the refacing marks can still be seen on the face. 200 quid
I also have a pair of Newman ph3 road rally cams with Newmans own anodised alloy verniers, these have done the same mileage as the head, and are as new. These run with std lifters, and are fine with std springs fitted to the head. Powerband is 2-7k. No mods are needed to use these. 200 quid
Last but not least, I have a pair of R1 40mm throttle bodies complete with injectors TPS etc.They are like brand new. 50 quid.
I would expect this lot to make 180 - 190 bhp with sidedraughts/ throttles and a 4 branch , so grab it now and wake up your zetec! If you buy the head and cams, I will throw in the throttles, a gates cam belt and a zetec timing kit for free!! Please do shout if you think I am off the mark price wise!!


Cams and verniers dowelled for safety!

Thanks very much
Weeksy
I also have a pair of Newman ph3 road rally cams with Newmans own anodised alloy verniers, these have done the same mileage as the head, and are as new. These run with std lifters, and are fine with std springs fitted to the head. Powerband is 2-7k. No mods are needed to use these. 200 quid
Last but not least, I have a pair of R1 40mm throttle bodies complete with injectors TPS etc.They are like brand new. 50 quid.
I would expect this lot to make 180 - 190 bhp with sidedraughts/ throttles and a 4 branch , so grab it now and wake up your zetec! If you buy the head and cams, I will throw in the throttles, a gates cam belt and a zetec timing kit for free!! Please do shout if you think I am off the mark price wise!!


Cams and verniers dowelled for safety!

Thanks very much
Weeksy
Last edited by Weeksy; Jun 9, 2011 at 08:58 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
Jan 4, 2024 02:36 PM
JoeyBoyden
General Car Related Discussion.
0
Aug 18, 2015 10:52 PM




