Mk1 xr4i parts forsale
Dec 29, 2010 | 08:20 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Mk1 xr4i parts forsale
starter motor £5
alternator £5
2x doors in very good condition £15 each
opening quarter glass £5 for both
Type 9 gearbox, good condition £50
set of cylinder heads £5
engine bay bulkhead, the black panel that runs behind the battery £20
metering head £10
headertank £3
many other parts as breaking a xr4i
cheers Matthew
Jan 18, 2011 | 01:30 AM
Wahay!! I've lost my Virginity!!
Joined: Oct 2010
Posts: 74
Likes: 0
looking for pass side rear non opening quarter with the xr4i etch in
Jan 18, 2011 | 11:54 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
sorry don't have one
cheers Matthew
Feb 14, 2011 | 10:23 PM
Joined: Aug 2009
Posts: 303
Likes: 1
From: birmingham
hi mate would you consider posting the heads if so how much and what condition are they in cheers mat
Feb 15, 2011 | 06:45 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
sorry heads now gone
cheers Matthew
Feb 23, 2011 | 08:58 PM
Joined: Feb 2005
Posts: 441
Likes: 2
From: Isle of man
Hi Matthew,
Do you still have the bulkhead (does it have the rubber top and centre piece)
and a complete plastic scuttle with ends
cheers
Baz
Feb 24, 2011 | 05:58 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
baz walton
Hi Matthew,
Do you still have the bulkhead (does it have the rubber top and centre piece)
and a complete plastic scuttle with ends
cheers
Baz
Hi Baz, yes i still have the bulkhead but sorry don't have the rubber or plastic centre section
cheers Matthew
Feb 28, 2011 | 07:33 PM
Joined: Feb 2011
Posts: 1
Likes: 0
From: Bromsgrove
XR4i quarterlights
Quote:
Originally Posted by
chasemk2
looking for pass side rear non opening quarter with the xr4i etch in
Hi
Have a look at this link:
http://www.thevehicleglasscompany.co.uk/miscitems.html
Regards
mungo
May 31, 2011 | 11:17 PM
Joined: Jul 2009
Posts: 1,280
Likes: 1
From: HUDDERSFIELD
do you still have opening 1/4 glass?
is it clear?
Jun 1, 2011 | 09:41 AM
Joined: Aug 2010
Posts: 4,469
Likes: 1
From: Bristol
Hello mate I need the door panel screws
Jun 1, 2011 | 08:55 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
YOREVOL
do you still have opening 1/4 glass?
is it clear?
sorry, don't have them
cheers Matthew
Jun 1, 2011 | 08:55 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
cossie891
Hello mate I need the door panel screws
sorry don't have them
Jun 2, 2011 | 01:45 PM
I've found that life I needed.. It's HERE!!
Joined: Jan 2009
Posts: 1,209
Likes: 1
From: northampton
Is the type 9 off a v6 and is it rwd?
Jun 3, 2011 | 06:00 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
scoobypete
Is the type 9 off a v6 and is it rwd?
sorry gearbox sold
cheers Matthew
Jun 3, 2011 | 05:19 PM
Joined: Jul 2004
Posts: 493
Likes: 3
From: DERBY
Quote:
Originally Posted by
chasemk2
looking for pass side rear non opening quarter with the xr4i etch in
pm sent
Jul 1, 2011 | 10:59 AM
Joined: Apr 2006
Posts: 3
Likes: 0
looking for brake master cylinder for non-abs XR4i
Jul 6, 2011 | 08:27 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
olafu
looking for brake master cylinder for non-abs XR4i
hi,yes i have one, where are you located?
cheers matthew
Nov 3, 2011 | 03:23 PM
Joined: Nov 2011
Posts: 1
Likes: 0
From: fife
hi mathew,looking for dashboard for my mk1 xr4i im restoring,someones fitted mk2 to it .want to keep it original
cheers kevin
Nov 4, 2011 | 07:48 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
sorry, don't have a mk1 dash, there like hens teeth
cheers Matthew
Nov 28, 2011 | 10:15 PM
Joined: Nov 2011
Posts: 3
Likes: 0
From: Knottingley
i have a mk1 dash,no cracks in mint condition that im selling
Mar 10, 2012 | 09:10 PM
Joined: Jan 2010
Posts: 28
Likes: 0
From: New Zealand
Hi Matthew
Just a small part - do you have the metal spring clip that goes over the fuse box cover?
Regards
Jason
Mar 13, 2012 | 10:55 PM
Joined: Jun 2011
Posts: 20
Likes: 0
From: moon
hi do you have
hi do you have plastic kick plates x2 ..plus the plastic sill covers x2 think they also go over the door rubbers do on most cars cant remember on mine lol price please plus postage to lowestoft suffolk
Mar 15, 2012 | 05:55 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
I'll have a look for those parts not too sure I have them, I'll let you know
Cheers matthew
Mar 15, 2012 | 06:16 PM
Joined: Jul 2008
Posts: 1,821
Likes: 0
From: at home
i know its a slim chance but im after the box that sits behind the glovebox and does the onboard computer, doors etc.
Pete
Mar 15, 2012 | 06:40 PM
Joined: Jun 2008
Posts: 8,006
Likes: 50
From: Location Location..
Do you still have the rear inner plastic arch liners?
Mar 15, 2012 | 06:42 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Sorry never had any rears only fronts and they sold
Cheers matthew
Mar 18, 2012 | 10:50 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
D16PJM
i know its a slim chance but im after the box that sits behind the glovebox and does the onboard computer, doors etc.
Pete
i think i have one, i know there is 2 boxes, one has use on 4x4 only and then i think there is a smaller box, i'll try and get a pic, do you have a pic of the box you need?
cheers Matthew
Mar 18, 2012 | 11:21 PM
Joined: Jul 2008
Posts: 1,821
Likes: 0
From: at home
Quote:
Originally Posted by
3dr cossie
i think i have one, i know there is 2 boxes, one has use on 4x4 only and then i think there is a smaller box, i'll try and get a pic, do you have a pic of the box you need?
cheers Matthew
i will have a go at a picture tomorrow.
Thanks Pete
Mar 21, 2012 | 09:57 AM
Wahay!! I've lost my Virginity!!
Joined: Apr 2011
Posts: 83
Likes: 0
From: Devon
Hi do you have the XR4i remote tailgate release solenoid as on early MK1s if so is it working and how much with post thanks.
Mar 21, 2012 | 10:37 AM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
cosworthkev
Hi do you have the XR4i remote tailgate release solenoid as on early MK1s if so is it working and how much with post thanks.
i'm reshelling my xr4x4 mk1 next month and that has a solenoid boot release and it works, so if your still looking for one then i'll pm you
cheers Matthew
Mar 21, 2012 | 12:25 PM
Wahay!! I've lost my Virginity!!
Joined: Apr 2011
Posts: 83
Likes: 0
From: Devon
Mar 25, 2012 | 01:20 PM
I'm Finding My Feet Here Now
Joined: May 2005
Posts: 115
Likes: 0
From: mansfield
Mar 25, 2012 | 07:08 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
When I re shell my xr4x4 next month I'll have a carpet then
Mar 26, 2012 | 04:21 PM
I'm Finding My Feet Here Now
Joined: May 2005
Posts: 115
Likes: 0
From: mansfield
Quote:
Originally Posted by
3dr cossie
When I re shell my xr4x4 next month I'll have a carpet then
will keep that in mind mate if i dont find one before cheers
Mar 30, 2012 | 08:45 PM
Joined: Jun 2011
Posts: 20
Likes: 0
From: moon
hi could you give me price on the rear tail gate lock also if cheap enough could you give me a price on 2 x plastic kick plates by drivers footwell and the 2x plastic sill plate covers on normal cars they go over the door aperture rubber to stop ya kicking door aperture rubbers off ,if you have them bits could ya let me know including postage thanks bo
alternator £5
2x doors in very good condition £15 each
opening quarter glass £5 for both
Type 9 gearbox, good condition £50
set of cylinder heads £5
engine bay bulkhead, the black panel that runs behind the battery £20
metering head £10
headertank £3
many other parts as breaking a xr4i
cheers Matthew[/QUOTE]
Mar 30, 2012 | 09:40 PM
Joined: May 2003
Posts: 6,594
Likes: 3
do you have a working warm up regulator?thanks
Mar 31, 2012 | 12:39 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
sidewaysbo
hi could you give me price on the rear tail gate lock also if cheap enough could you give me a price on 2 x plastic kick plates by drivers footwell and the 2x plastic sill plate covers on normal cars they go over the door aperture rubber to stop ya kicking door aperture rubbers off ,if you have them bits could ya let me know including postage thanks bo
alternator £5
2x doors in very good condition £15 each
opening quarter glass £5 for both
Type 9 gearbox, good condition £50
set of cylinder heads £5
engine bay bulkhead, the black panel that runs behind the battery £20
metering head £10
headertank £3
many other parts as breaking a xr4i
cheers Matthew
[/QUOTE]
sorry the bits your after have all sold
cheers Matthew
Mar 31, 2012 | 12:40 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Quote:
Originally Posted by
big_wig_074
do you have a working warm up regulator?thanks
i have one, but i have two other v6 sierra's so keeping it as a spare
cheers Matthew
Jun 6, 2012 | 05:05 PM
I'm Finding My Feet Here Now
Joined: May 2005
Posts: 115
Likes: 0
From: mansfield
have you still got starter and alternator if so price delivered cheers
Jun 6, 2012 | 06:11 PM
Thread Starter
Advanced PassionFord User
Joined: Jun 2003
Posts: 2,035
Likes: 7
From: morecambe
Yes still have starter and alternator, will have to get you a postage price but it won't be cheap as they are heavy
Cheers Matthew