my new s1 project
got this little project yesterday ,86 with 44k on the clock .as you can see it will require some major rssto work but in general it has a solid floor etc .im in two minds wether to go all out and cossie it or just get it back to a nice useable s1.
what do you think ?




what do you think ?




it sure does daz ,and will get all the love needed to get her back to her former glory.
its a long term project,but will be bare metalled and all panels needed will be fitted .
its a long term project,but will be bare metalled and all panels needed will be fitted .
has anyone got expierience with hadrian panels for a s1 ,ive only heard good things and was wondering has anyone had any bad experiences with them.
all info greatly appreciated folks
all info greatly appreciated folks
Trending Topics
cheers scott ,its a long term one mate ,i cant see me starting it till next summer to be honest .
im suppossed to be a guy looking at them this week ,i will let you know if they dont go scott
hi rob ,the floor is already painted and was no rot atall ,as was the boot floor .
im going to bare metal it anyway and make sure theirs no rust lurking under the paint
inner wings are solid ,boot floor good ,battery tray good .the car is pretty sound all round .
the reason the front looks so tatty is the guy who owned it was driving it up and down a 4 inch kerb and it kept banging the road

but i love s1,s


so will be worth the effort lol
hi rob ,the floor is already painted and was no rot atall ,as was the boot floor .
im going to bare metal it anyway and make sure theirs no rust lurking under the paint
inner wings are solid ,boot floor good ,battery tray good .the car is pretty sound all round .
the reason the front looks so tatty is the guy who owned it was driving it up and down a 4 inch kerb and it kept banging the road
but i love s1,s

so will be worth the effort lol
im going to bare metal it anyway and make sure theirs no rust lurking under the paint
inner wings are solid ,boot floor good ,battery tray good .the car is pretty sound all round .
the reason the front looks so tatty is the guy who owned it was driving it up and down a 4 inch kerb and it kept banging the road

but i love s1,s


so will be worth the effort lolRob,
thats what i was thinking with floors being good ,i think a nice sensible 150/175 bhp will do .i have a set of 16 inch rl7s sourced but they need a refurb andy.
no the revs are satying put ,scott was looking at my sharktooths .
no saffs will be broke or harmed whilst the s1 is restored andy lol

im not too up on the efi on the turbos andy,does it make a big difference?
what do you think of hadrian panels ?
huge difference james, karlos g will agree, one of the best mods you can do to a MFI car
iv bought a few of there panels james but never fitted them
but i did seach on here about them, must said best fitting panel you can get, even one said the hadrian fitted better than ford panel.
thats my thinking,but to be honest it wont be sold [famous last words lol]
cool andy ,you will be busy answering pms in the future no doubt
cars out of nottingham ,and was vandalised in the guys garage
lights broke ,widows broke ,paint threw over the car outside and inside ,seats all slashed ,
the guy i bought it off replaced most of the damage including bonnett ,door etc
huge difference james, karlos g will agree, one of the best mods you can do to a MFI car
iv bought a few of there panels james but never fitted them
but i did seach on here about them, must said best fitting panel you can get, even one said the hadrian fitted better than ford panel.
iv bought a few of there panels james but never fitted them
but i did seach on here about them, must said best fitting panel you can get, even one said the hadrian fitted better than ford panel.cars out of nottingham ,and was vandalised in the guys garage
lights broke ,widows broke ,paint threw over the car outside and inside ,seats all slashed ,
the guy i bought it off replaced most of the damage including bonnett ,door etc
[QUOTE=james kiely;5127209]got this little project yesterday ,86 with 44k on the clock .as you can see it will require some major rssto work but in general it has a solid floor etc .im in two minds wether to go all out and cossie it or just get it back to a nice useable s1.
what do you think ?




[/QUOTE
nice project mate keep it as an s1 turbo though in my opinion but very nice project
what do you think ?




[/QUOTEnice project mate keep it as an s1 turbo though in my opinion but very nice project
i cant believe i missed this rob



i just want it reliable and useable ,i want to have something to use when the saffs are broke down lol

just had another look around it today and the parcel shelf is like new ,no holes for speakers and the dash has no cracks atall
Last edited by james kiely; Oct 12, 2010 at 08:02 PM.

cheers mate

im surprised at the number of people who think keeping it standard is the way to go,minds made up now .
i will find one with a rotten floor for a cossie conversion at a later stage lol


Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
Oct 7, 2015 12:56 PM
Kiran1600E
Pictures, video & Photoshop Forum
11
Oct 2, 2015 11:35 AM
SMILER258
Restorations, Rebuilds & Projects.
36
Sep 28, 2015 09:04 AM







if the fllors are good james i wouldnt cossie it,
will you be putting EFI on it mate?

