In typical PassionFord fashion i have a BMW question i need answering

I have an E36 but need longer wheel bolts as wider wheels have been fitted and the OEM bolts do not have enough turns on the thread to be safe IMO.

Where can i get these from?

 

depending on if he's ever open, steve from speed shack used to keep loads in his shop, but now he's moved to the shed behind the shop, he's hardly ever open

if they are the same fitment as ford ones though, burton will flogg you them for about Ł2 each

 

Or you could try Rally Design, have a look at their website.

 

try c/a automotive

http://www.ca-automotive.co.uk/produ...faWQ9OA==.html

 

whats the deal with steve now dojj ,has his overpricing brought his downfall ?

 

Dunno mate, I think he's flogged the shop as they've redone the whole highstreet and now he's round the back. Problem is that not a lot of people know this and whenever I've been there he's been closed

 

cheers guys - a mate managed to find out that the wrong wheel bolts had been used for the fronts there was golf bolts in there which are too short. Chagned to OEM and all is well

now just need to find a lsd and lower it and get some skidding done

 

Steve is still trading. But due to the rules and regulations he cant treat it as a shop.

Hes only aloud pre arranged appointments rather than people coming to visit unanounced.

Hes normally always there betwwen 10-6 tuesday-saturday. it all looks shut up to comply with the rules of having the land but theres a buzzer on the gate post you can ring.

when ever ive rung him for bits hes always been able to shot down if hes not there.

He does alot of trade off this webdite so its not an issue being tucked away in a shed.

 

Whats his number Mike - aint been down there for years

 

01895449066- if hes not there the awnser phone will give you his mobile no.

 

excellent

 

Didn't know there were rules and regulations about how he trades.

 

The land owner set the rules. It's because his entrance is between all the houses.