1.8 Zetec Blacktop
Thread Starter
An eye for detail...
iTrader: (1)
Joined: May 2009
Posts: 1,525
Likes: 0
From: Preston, Lancs.
1.8 Zetec Blacktop
As above really. Must be 1.8 and in relative running order.
I'll be putting different pistons in so doesn't matter too much if they aren't in great shape. Bores need to be good, as does head etc. And i need to be able to measure at least one piston acurately.
Rods must be sound.
Don't need exhaust manifold but handy if it comes with it, same for inlet. Need fuel rail but no injectors or ECU. Most sensors/pumps etc need to be present.
I'm doing a turbo conversion so basically a decent base to work from, but cheap
I'll be putting different pistons in so doesn't matter too much if they aren't in great shape. Bores need to be good, as does head etc. And i need to be able to measure at least one piston acurately.
Rods must be sound.
Don't need exhaust manifold but handy if it comes with it, same for inlet. Need fuel rail but no injectors or ECU. Most sensors/pumps etc need to be present.
I'm doing a turbo conversion so basically a decent base to work from, but cheap
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
Oct 17, 2021 10:09 AM
SMILER258
Restorations, Rebuilds & Projects.
36
Sep 28, 2015 09:04 AM