Was the XR3I and XR2I engine identical?
Guest
Posts: n/a
Did they change anything to fit it in the smaller fiesta or was it straight out of the escort? i need a air cleaner hose and ford dont do the 3I one anymore but the finis code for the 2I is different but it looks identical on microcat
anyone clear this up as i need one ASAP.
20K+ Super Poster.
Joined: May 2003
Posts: 20,599
Likes: 0
From: Ramsgate, Kent Drives: E39 530D Touring
the EFi XR3i adn XR2i are the same
the MFi lump in the pre-90 XR3is (the common ones) are different
the MFi has the hose coming round the back of the engine on the right (looking from front of car) the EFi has it coming over the top of the rocker cover
the MFi lump in the pre-90 XR3is (the common ones) are different
the MFi has the hose coming round the back of the engine on the right (looking from front of car) the EFi has it coming over the top of the rocker cover
Guest
Posts: n/a
Not all XR2i's were EFI were they? microcat lists it as MFI
it shows the k jet metering head with the hose that goes from the airbox to the throttle body same as the MFI XR3i
it does also list a EFi XR2 but that is obviously no good to me, i'm guessing that is the same engine as the EFi XR3.
XR3i MFi Hose finis 1613155
XR2i MFi Hose finis 1643034
XR3i MFi Hose finis 1613155
XR2i MFi Hose finis 1643034
Too many posts.. I need a life!!
Joined: May 2004
Posts: 500
Likes: 0
From: Uxbridge (Junc. 1 M40, M25 J16)
xr2i was deffinately only ever made as an efi 1.6 cvh 8v and a 1.8 efi zetec 16v.
xr2i cvh version was aslo almost identical in mechanical parts to the FRST. just different oil return comp ratio etc. whole whead is exactly the same.
xr2i cvh version was aslo almost identical in mechanical parts to the FRST. just different oil return comp ratio etc. whole whead is exactly the same.
Thread
Thread Starter
Forum
Replies
Last Post
marky_g
General Car Related Discussion.
10
Aug 15, 2015 10:43 AM




