1.7 Power Engineering Rst engine
Thread Starter
PassionFord Post Troll
iTrader: (1)
Joined: May 2004
Posts: 2,793
Likes: 39
From: Eltham,South London
1.7 Power Engineering Rst engine
This is still up & running in my car & will be until sold.
Rough spec is: Fully lightened & balanced, Mahle pistons, High pressure oil pump,stage 2 head with 285t2 & vernier.
Covered about 7,000 miles.
Makes great power & runs A1.
£600 or £400 without the head
Rough spec is: Fully lightened & balanced, Mahle pistons, High pressure oil pump,stage 2 head with 285t2 & vernier.
Covered about 7,000 miles.
Makes great power & runs A1.
£600 or £400 without the head
Thread Starter
PassionFord Post Troll
iTrader: (1)
Joined: May 2004
Posts: 2,793
Likes: 39
From: Eltham,South London
It made 241bhp at the flywheel @20psi. Had stage 3 turbo,big i/cooler,cam,good chip etc.
Goes like stink pulls really well a good strong engine.
Got print outs somewhere
Goes like stink pulls really well a good strong engine.
Got print outs somewhere
Trending Topics
as powers never made one
Thread Starter
PassionFord Post Troll
iTrader: (1)
Joined: May 2004
Posts: 2,793
Likes: 39
From: Eltham,South London
Well thats what it says on the receipt as i bought from my mate. Its just a 1.6 bored out.
Even if they did'nt do a 1.7 they rebuilt it fully to that spec.
Even if they did'nt do a 1.7 they rebuilt it fully to that spec.
Thread
Thread Starter
Forum
Replies
Last Post
JoeyBoyden
Restorations, Rebuilds & Projects.
26
Jan 4, 2024 02:36 PM