2.1 16v zetec Turbo'd Engine
Acrolite forged pistons
Stainless steel large valves
Ported and polished Head with reshaped conbustion chambers
H section steel conrods
Lightend an balanced Flywheel
Oil jets
High pressure oil pump
6.5mm silicone high tension leads engine

3 inch mongoose stainless steel exhaust, t3 conversion

Hybrid roller bearing 4*4 Cossie Turbo, cost £1300

large Baileys Intercooler

sierra 4x4 Induction Kit, HUGE!!

Baily Piston Dump Valve

Baily Oil Seperator

Baily Swirl pot

Samco Silicone Hoses

Steel Braided brake lines front to rear

Front Strut Brace

Avo fully adjustable coilover suspension with Fully adjustable camber

aeroquip brake hoses

uprated front brakes cossie?

uprated hybrid aluminium radiator made by pace

tsw 15inch alpine alloys

Boost,oil pressure,Fuel Pressure and battery Voltage Gauges.
Oil to Fuel Ratio Meter with built in dash LEDs
under seat lighting

Ice in car but needs adjusting..

Full recaro interier

Uprated Gear box

Padel clutch

Car is rotten on rear arches and sills unfortunately

Will poss break or sell car complete for GD offers

Its only currently running 0.5bar at 230bhp, with a chip, fueling and more boost the engine's specd for 400bhp

 

how much for complete car mate or if you breaking it how much for front lights

 

Not keeping it then?
How much for the engine? And Turbo seperate?
What gearbox is it?
And How much for paddle clutch?

 

You have pm

 

how much for the coilovers and how much to post thx beno

 

pm me a price on pistons and rods cheers, and do you know the size of the pistons? cheers

 

Hi chris,
Is it a standard FRST interior, and what kinda nick is it in..?

 

Make me an offer on the coilies

I wont sell the pistons seperately

I have two FRST interias, one very gd with one slight fag burn, other set drivers bolster is worn

A couple of bits now on ebay

http://search.ebay.co.uk/_W0QQsassZhhchillhhQQhtZ-1

 

how much for all the smiths gauges???


will u sell the head on its own ?

 

alloy rad price?? and also how much for the box?? what is the uprated part?? will it fit a cvh??

dave

 

pm'd

 

also how much for the exhaust,swirl pot,breather,gearbox,clutch????cheers

 

How much for the cossie induction kit and gearbox?

 

what you want for the four gauges?

 

hi chris how much for the engine and loom

thanks
rob

 

Thanks for all interest but really wanting to sell full car

£2500

You get ALOT of car for this!