Zetec over heating, HELP PLEASE
#1
Zetec over heating, HELP PLEASE
Hi everyone, I have a mk 6 fiesta 2006 1.6 zetec s and it over heating!
I have had a look today and....
Top water hose is boiling and bottom is freezing!
Heating inside car is cold and gauge on dash reads normal but header tank is bubbling hot!
Done a sniffer test and a compression test that both come back fine!
I have taken the thermostat out and checked that it opened ok!
Do you think it's a water pump???
Cheers
Danny
I have had a look today and....
Top water hose is boiling and bottom is freezing!
Heating inside car is cold and gauge on dash reads normal but header tank is bubbling hot!
Done a sniffer test and a compression test that both come back fine!
I have taken the thermostat out and checked that it opened ok!
Do you think it's a water pump???
Cheers
Danny
#3
big floppy donkey dick
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
on the late ones the waterpump holds the timing belt tensioner so you need to do a belt kit aswell
if you took the stat out and its still boiling over id have a look at the waterpump, although they are metal impellors
if you took the stat out and its still boiling over id have a look at the waterpump, although they are metal impellors
#4
Might help might not...
...... but i have a mk5 zetec s, and a few weeks back it started overheating too,... turns out it was the top hose , so replaced that and hasnt done it since . Could be that
...... but i have a mk5 zetec s, and a few weeks back it started overheating too,... turns out it was the top hose , so replaced that and hasnt done it since . Could be that
#7
Little update (still need help)
Had the water pump off today... They are plastic, but its fine!
I'm really baffled now!.... Had a few people suggest head gasket but I'm not convinced + I've done a sniffer test & compression test that both came back fine!
What else could it be?
Cheers
Danny
Had the water pump off today... They are plastic, but its fine!
I'm really baffled now!.... Had a few people suggest head gasket but I'm not convinced + I've done a sniffer test & compression test that both came back fine!
What else could it be?
Cheers
Danny
Trending Topics
#9
big floppy donkey dick
Join Date: May 2003
Location: Rouse Sport heaven ;)
Posts: 4,514
Likes: 0
Received 3 Likes
on
3 Posts
ooooooooooooooooooh also, one thing to check that ive came accross a couple of times
on the back of the head, theres a small pipe that comes out of the head (g/box side)
the aluminium 90degree pipe currodes and blocks solid with currosion and shyte, make sure the pipe is free and the hole in the head is too!
this is the "bleed pipe" that returns water/air to the tip of the header tank
on the back of the head, theres a small pipe that comes out of the head (g/box side)
the aluminium 90degree pipe currodes and blocks solid with currosion and shyte, make sure the pipe is free and the hole in the head is too!
this is the "bleed pipe" that returns water/air to the tip of the header tank
Last edited by Cossie Sean; 04-03-2013 at 07:54 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mk3ste
Restorations, Rebuilds & Projects.
19
17-10-2021 10:09 AM