2wd saph for sale
#1
Regular Contributor
Thread Starter
Join Date: Feb 2008
Location: edinburgh
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
2wd saph for sale
G-PLATE 89 WHITE 87,000 MILES (ONLY 3,000 ON REBUILT ENGINE)FOLDER FULL OF HISTORY,MOTS,TAX DISCS,RECIPTS ETC 10 MONTHS MOT 4 MONTH TAX CLIFFORD ALARM.VERY CLEAN SHELL NO RUST ON REAR ARCHES,DOORS OR ANYWHERE ELSE FOR THAT MATTER.ORIGINAL PAINT UNDERNEATH NEVER WELED AND SPOTLESS REALLY ONLY THING THAT LETS BODY WORK DOWN IS 4X4 BONNET DIFFERENT SHADE OF WHITE STONE CHIPS TO BUMPER THO THIS IS A DRIVEN "RS" SO EXPECTED AND SMALL DENT ON DRIVER DOOR WHICH CAN BE FIXED ANYWAY.CLOTH INTERIOR IN GREAT CONDITION WITH ONLY SLIGHT WEAR ON BOTTOM DRIVERS SEAT,REST IN MINT CONDITION.ENGINE WAS FULLY REBUILT BY AP M/SPORT 2YRS AGO FOR 400 PLUS BHP WHICH AFTER RUN IN PERIOD WAS SET-UP BY MSD....................
Engine
Low Compression bottom end with Low Comp Mahyle Pistons, Twin Valve Springs (increases rev capacity), Ground Crank, Lightened & Balanced, Polish & Ported, New Valves, Oil Pump, Water Pump, All Internals are new, New T35 turbo, Bailey Turbo Dampner, RS500 cooler, Inlarged Throttle Body, Group A filter, Group A dump valve, Group A fuel pump (hard wired), Siemans black injectors, 3bar Map sensor, Group A breather system, Strut Brace, Samco & Rouse Sport Hoses, Bailey Header Tank, Swirl Pot, Power Stearing Tank, new Power Stearing Pump, new Petrol Tank, Full Stainless Exhaust, Mapped by MSD
Suspension & Brakes
Lowered 35mm at front with koni Shocks & Avo Springs.
Upgrated Standard Ride Height at rear with Bilstein Shocks.
Fully Polybushed.
AP Racing CP6600 four pots (from TVR) with Wilwood 330mm rotors & bell up front.
Brand new standard calipers on the rear, with new discs & pads.
Interior
Grey cloth
Boost and oil pressure ford gauges
Exterior
4x4 bonnet
4x4 rear smoked light
clear fronts and side repeaters
Wheels
17" comp mo 5 spoke painted flint cossie grey
new 225s rear and will have new 205s up front this week
WILL GET MORE PICS UP SOON
SO IN SHORT VERY CLEAN SAPH WITH PROPER BUILT ENGINE ON LOW MILES AND GREAT HISTORY.PRICE IS £6500 WILL CONSIDER P/X ON ANOTHER RS CASH MY WAY.CONTACT NO. 07907547884
CHEERS
Engine
Low Compression bottom end with Low Comp Mahyle Pistons, Twin Valve Springs (increases rev capacity), Ground Crank, Lightened & Balanced, Polish & Ported, New Valves, Oil Pump, Water Pump, All Internals are new, New T35 turbo, Bailey Turbo Dampner, RS500 cooler, Inlarged Throttle Body, Group A filter, Group A dump valve, Group A fuel pump (hard wired), Siemans black injectors, 3bar Map sensor, Group A breather system, Strut Brace, Samco & Rouse Sport Hoses, Bailey Header Tank, Swirl Pot, Power Stearing Tank, new Power Stearing Pump, new Petrol Tank, Full Stainless Exhaust, Mapped by MSD
Suspension & Brakes
Lowered 35mm at front with koni Shocks & Avo Springs.
Upgrated Standard Ride Height at rear with Bilstein Shocks.
Fully Polybushed.
AP Racing CP6600 four pots (from TVR) with Wilwood 330mm rotors & bell up front.
Brand new standard calipers on the rear, with new discs & pads.
Interior
Grey cloth
Boost and oil pressure ford gauges
Exterior
4x4 bonnet
4x4 rear smoked light
clear fronts and side repeaters
Wheels
17" comp mo 5 spoke painted flint cossie grey
new 225s rear and will have new 205s up front this week
WILL GET MORE PICS UP SOON
SO IN SHORT VERY CLEAN SAPH WITH PROPER BUILT ENGINE ON LOW MILES AND GREAT HISTORY.PRICE IS £6500 WILL CONSIDER P/X ON ANOTHER RS CASH MY WAY.CONTACT NO. 07907547884
CHEERS
Trending Topics
#17
Part of the Furniture
iTrader: (1)
Join Date: Dec 2005
Location: SCOTLAND
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
why not pm the owner and ask him, and if your not interested in the car why keep posting on his for sale thread about different bits like the price, imo it is a very good price for the spec of it. Dont reply to me on this thread!
I have been in the car and it is very good example with good spec and very quick!
Good luck with sale but i think youl regret it!
#20
PassionFord Post Troll
Join Date: Apr 2004
Location: Shropshire.
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
#24
PassionFord Post Troll
Join Date: Apr 2004
Location: Shropshire.
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
#26
PassionFord Post Troll
Join Date: Apr 2004
Location: Shropshire.
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Oh dear,seller must not understand the difference between 'live mapped' and 'custom chip/set up'!!!!
Can't see it being 400 bhp on L6 and chip.
Never mind,still a nice looking Saph.
What boost pressure does it run??????
Can't see it being 400 bhp on L6 and chip.
Never mind,still a nice looking Saph.
What boost pressure does it run??????
#28
Regular Contributor
Thread Starter
Join Date: Feb 2008
Location: edinburgh
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
was told by the mate i got it off 350-380 @25psi and will be over 400 @35 psi.beleive this was what he was also told when at MSD.TBH couldnt give fuck to the exact power output the 400 bhp in advert was to give a idea of level of work that went into the engine build.
if anyone is intrested in the car PM or pick up the phone
a thank you to the people with positive comments,cheers
#29
RSHoleinator
iTrader: (10)
Its unbelievable the tossers who try and pick faults in other peoples adverts!! i had this problem on here when i was selling a couple of my motors, people clearly not interested in buying the car but love picking faults and wasting peoples time.
Its a nice clean saph with very good spec and if i was in the market for another one i would be down for a look at this one for sure.
As said before good luck with the sale mate.
Its a nice clean saph with very good spec and if i was in the market for another one i would be down for a look at this one for sure.
As said before good luck with the sale mate.
#30
PassionFord Post Troll
Join Date: Apr 2004
Location: Shropshire.
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
#37
PassionFord Post Troll
Join Date: Apr 2004
Location: Shropshire.
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts