Originally Posted by perm1

Hi

Firstly I would like to say I'm no painter nor detailer, I just like to have ago first before paying someone ... That said I have come across a similiar problem before and this is how I got over it

Sealey mop machine
Farecla g mop head (cutting head... very firm foam)
farecla g3 or 3m fast cut (3m stuff is new to me)
Farecla g10 ...3 m do an equviliant but I've not used it yet
And a standard polish on a polish foam head to finish ... This should get you back to something decent

For the more stubborn areas I did use 2000grit wet sand with a sanding block (sanding block is very important) first and followed up with all the steps above

I must say though I had droplets of paint rather than overspray so you might get away with just g10 and a polish

I'm sure you tube has vids on how to use any products listed above

Hope this helps