Originally Posted by
BRAMMER
I had a few issues with the inserts in the mount when i was fitting it - when bolted up the inserts were a little too long and preventing it from sitting flush - i tested the depth of the hole and their is enough for the bolt although they could do with a few mm off as they are a pain to fit.
Meant to speak to you regarding the prop bearing - how did you know yours had failed as i'm wondering if to replace mine, did you get your gearbox mount sorted?
I just jacked the car up and when underneath grabbed the prop from either side of the centre joint and saw how much I could move it (It was alot) so I removed and stripped it down.
The bearing on mine is fine but the donut was shagged.
Have a Vibra-techniques mount to try but still waiting on the prop donut to be delivered, plus have some new rear springs so makes sense to do it all in one hit rather than work on the car 3 times so will let you know bud.