Originally Posted by
BRAMMER
Looking Good Jeff
I wanted to ask you a question mate, do you have any tipps about stripping the underside down - mainly around the beam is their any tips when removing - i don't want to remove it whole then struggle to under once off the car how did you dismantle yours?
Done that with mine too,
Unbolt prop to rear diff, 4 bolts.
Cut all brake pipes and disconnect handbrake.
Take hub nuts off the car before you drop the axle off, it's easier.
Petrol tank off.
Fuel pump cradle off.
Drive shafts out.
I unbolted the shockers off at the top with a trolley jack underneath then let it down.
Then removed the shocker altogether. (both sides)
Unbolt anti roll bar.
Then take beam plates off, 2 bolts.
stick trolley jack under diff.
Unbolt the bolts that go through the beam mounts.
Then unlbolt the 4 bolts on the diff hanger
Let your jack down
and down she comes.